1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2021 Vintage 7 projects

Discussion in 'WERA Vintage' started by 2Big4Bike, Oct 17, 2020.

  1. evakat

    evakat Well-Known Member

    Anyone have some stock 96 ZX6R plastics laying around???
    My brother has a project build and needs some fairings to complete it
     
  2. SpeedWerks Racing

    SpeedWerks Racing Well-Known Member

    FWIW, We just sold 2 93's to the same guy @ 7500 and 6500... may wanna keep it bro...good investment
     
    Shenanigans likes this.
  3. SpeedyE

    SpeedyE Experimental prototype, never meant for production

    My 'bike' goal is to be able to rade a bike corretlcy/safely again.
    2nd goal, is to backroad, correctly/hard.
    3rd, get leathers and do couple TD's correctly.
    3rd, Vintage race, GSXR. (86-92?)
    4th goal, inline 600/750/1k? race (AM :oops: lol).
    I am hoping goals start happening/beginning in 2022 :)

    wera v7.JPG
     
    ToofPic and ungwaha like this.
  4. Eight Screws

    Eight Screws Well-Known Member

    Picture from the Classic Track Day from a couple of weeks ago

    It's hopefully going to be ready but definitely not pretty for a race outing this weekend at AHRMA
    Found in pulling it apart it does have a small oil leak as well which I need to chase down

    Does anyone have a 748/916/996 Fuel Tank for sale?
    Don't care about color as I am going to repaint but just want a good condition inside and out tank
    LMK
    Screenshot 2021-04-20 102225.jpg
     
    ungwaha and 2Big4Bike like this.
  5. Raceless man

    Raceless man Well-Known Member

    <-----likes every post in this thread. Easier than liking each one individually.
     
    Shenanigans, SpeedyE and evakat like this.
  6. jrsamples

    jrsamples Banned

    What's wrong with the tank you have? I have an extra yellow one. The previous doof did a tip over into a curb and put a ding into the curved edge. I smoothed it over with bondo and sanded it.....then a buddy sold me his cherry tank, so I never finished it.
     
  7. Eight Screws

    Eight Screws Well-Known Member

    My tank after I had the 18 layers of paint were removed and the dent repaired and primer applied is leaking at the back of the RH side seam

    At least I found it before full paint

    Borrowing one from a mate off his project 996 that is further behind than mine right now
     
  8. evakat

    evakat Well-Known Member

    My 87 FZR750RT project is moving along... hope to have it ready for paint by the weekend.
     

    Attached Files:

  9. evakat

    evakat Well-Known Member

    My 87 FZR750RT is slowly coming together.
     

    Attached Files:

  10. evakat

    evakat Well-Known Member

    Some more update on my 87 FZR750RT
     

    Attached Files:

    Once a Wanker.., britx303 and J Bart like this.
  11. evakat

    evakat Well-Known Member

    My 87 FZR750RT track toy is almost ready for some Plat time... painting almost done. Quick shifter mounted. Lever guards test fitted.
     

    Attached Files:

    Once a Wanker.., britx303 and J Bart like this.
  12. cowboy dann

    cowboy dann Well-Known Member

    lookin good
     
    Once a Wanker.. and evakat like this.
  13. britx303

    britx303 Boomstick Butcher…..

    V7 bump for Summit? Any y’all planning on being there for V7’s?
     
    evakat likes this.
  14. yokohama1

    yokohama1 Well-Known Member

    Yes, hope to be there with the Aprilia.
     
    britx303 likes this.
  15. Philip Mirgliotta

    Philip Mirgliotta Well-Known Member

  16. evakat

    evakat Well-Known Member

    My 87 FZR750RT track/racer is ready for duty...
     

    Attached Files:

  17. britx303

    britx303 Boomstick Butcher…..

  18. gpracer15

    gpracer15 Built to Ride

    I want that set up!
     
    Once a Wanker.. likes this.
  19. gpracer15

    gpracer15 Built to Ride


    bad ass and been a while since I seen the chapparal logo!
     
  20. ScottyRock155

    ScottyRock155 A T-Rex going RAWR!

    My SRAD is tuned up and ready to go, V7HW incoming!
     

Share This Page