For sale my track bike: 2007 Cbr600rr Miles:16,xxx Title: Clean Price $4700 Illinois area Oil changed with Motul v300 15w50 and stock filter from honda. Bike will come with an extra one. Coolant flushed with Engine Ice Brake fluid flushed with Castrol SRF racing fluid Safety wired MotoD drain plug Zeta Racing fill plug Engine covers Sliders Rear spools I have a front spool as well but it is not installed Michelin power RS tires Bike will come with new rear Power RS Front Brake pads SBS Racing pads Front suspension Race tech cartridges. Serviced 2 track days at TSE and set for 170 rider Rear Race Tech Shock Gpr V4 steering stabilized - serviced before season and i did 4 track days Clip ons - Woodcraft Renthal grips Brembo 19x18 master Steel braided lines front and back Yoshimira full exhaust(has a small damage from a low side) Annitori QS Sato racing rearsets(gp shift) Driven 520 sprockets -1/+1 Rx Max 520 chain - have 4 track days use Fiberglass Fairings Shorai light weight battery K&N air filter Ps- after the low side(last year) bike was serviced at TSE as i said before front suspension was redone and bike was set up for 170lbs... Bike runs good, shifts fine, Has served me well. Most of the maintenance was done by Me/oil change,brake flush,coolant flush etc/ i did 4 track days this year with intermediate pace. If you have any questions let me know. Preferably text at 608/408/8344
Good eye. I do recall yosh headers having clearance issues w certain fiberglass sets. OP may be able to clarify...it doesn’t say which brand it’s got so I’m assuming the worst...HotBodies.
Thank you! About oil choice supposedly 15w50 has better viscosity at higher temp. Anyways I’ve been using it with my old bike and this one.
Not sure about the fairings brand btw. Bought them used and painted them(well paint is spray paint) but i spent probably a month playing to get it like this. Anyways i do not have issues with the fairings because i put small extensions for the back bolts, but send me a PM with your phone or email and i will snap a picture about the belly pan. Actually here is a photo, i dont know if you will be able to see it. But tomorrow i can make another one of both sides if you want.