jaybuilt's hand built kawasaki bellytank triple

Oooooh, that's NICE! When you gonna race it?

 

cool looking, outside of the box thinking! kinda mad max meets roadracing.

 

Nice work...how does it ride?

 

vary good wolf

 

sick

 

Incredible.

 

supercool!

 

Very, very nice!

 

Nice work! And a Kawi to boot...

Are those 91-92 ZX-7 front end, wheels and swing arm?

 

das neato

 

are you gonna put a front fairing on it?

 

some info and pics

 

THE MOTOR IS A 500 cc KAWASAKI TRIPLE .THE FRONT AND REAR ARE ZX9 AND THE REST IS JAYBUILT .THE FRAME IS 1.250 MOLY THIN WALL AND WITH THE ALUM MOTOR /SWINGARM CONECTOR ATTACHED IT WEIGHTS 22 POUNDS. THE BIKE AS IT SITS IS 310POUNDS . ONE THING THAT WAS IMPORTANT WAS THAT IT HAS A VARY LOW PART COUNT .I BUILT A MOTOR STAND THAT HOLDS THE ENGINE WITH 1 BOLT AND SLIDES UNDER THE BIKE YOU REMOVE THE 2 BOLTS FROM TANK ,THE FUEL LINE ,THE CHAIN, 4 MOTOR BOLTS, THE EXAUST BOLTS ,SLIDE THROTLE AND CLUTCH OFF UNPLUG HARNESS AND PULL BIKE AWAY IT TAKES ABOUT 30 MIN TO SWAP THE ENGINE FROM A 500 TO A750 OR WHATEVER. THE MOTOR STAND ALSO CAN HOLD ALL THE IGN COMPONENTS SO YOU CAN RUN THE ENGINE ON THE STAND . YOU CAN DO A COMPLEET REBUILD ON THE STAND AS WELL.THE BIKE CAN BE COMPLEETLY APART IN 1 HR AND THEIR IS MABY 20 BOLTS TOTAL .I USE A GOKART FUEL PUMP that WORKS OFF IMPULCE FROM CRANK CASE. I HAVE A FUEL SPONGE IN TANK SO IT DOSENT SLOSH .THE THING IS ABOUT AS EASY TO RIDE FAST AS YOU CAN IMAGIN. YOU FEAL TOTALY IN CONTROL .IT JUST DOES WHAT YOU WANT IT TOO .

 

want

 

nice fab work!!

 

Very nice - very cool that you're on here.

Saw the pics from somewhere else recently...

Do you know anything about expansion chamber design? - Any good references you'd share?

 

single front brake rotor? :wow::wow::wow:

then the other pic shows a dual?

 

Fantastic workmanship. Good on ya!

 

Wow!!!! Wanna sell it?