BMW S1000RR Race Bike for Sale $30,000

The bike has never been crashed. Located at RidersDiscount.com headquarters in Holland, Michigan, interested parties should contact TJ at 866.931.6644 x 817.
Weight: 360lbs without fuel
Power: 204hp with VP MR-12
Mileage: 1,154 miles
Asking $30,000 with clean title.

The 2010 RidersDiscount.com BMW S1000RR Project Bike is for sale! This is the same bike that Jake Holden chose to ride over our own Yamaha YZF-R1 at Laguna Seca earlier this year. During that weekend, Jake qualified in eighth position, less than one-tenth off Larry Pegram’s BMW and in front of the other four BMW's on the grid - all with very little seat time on the bike!

This machine has been equipped with the best of everything from the wheels up, assembled and maintained with meticulous attention to detail by the RidersDiscount.com staff. Weighing in at 360lbs dry, suspension has been set up for AMA-spec Dunlop Superbike slicks by AMA Tuner James Compton using Traxxion Dynamics AK-Gas fork internals and a Penske Racing shock. To make it easier to work on the bike, where possible, most pieces of OEM TORX hardware were replaced with titanium pieces from Pro-Bolt. This includes engine cases, radiator bolts, fairing bolts, subframe hardware, front and rear axle nuts and much more. The bike has passed AMA American SuperBike tech inspection and has every bolt drilled for safety wire as required by AMA and WERA rules.

Before the bike was prepared for track duty, it was run-in on the street for the first 600 miles and then serviced as directed by BMW. After the break-in restrictions were eliminated, the bike started off strong, producing 182hp on a SuperFlow Dynomometer burning 89 octane pump gas. We then sent the ECU to be re-programmed for race use by BMW Motorrad in Germany as this allowed us to remove all street-going components, including most of the ABS system, while not having to worry about warning lights or other error codes being displayed on the dash. At that point, the bike made a total of 204hp on the same dyno running VP MR-12 fuel with a custom PC-V map. The PC-V was also mapped on the same day for AMA-spec Sunoco GTX260, which produced 194hp at the wheel. Both maps will be furnished to the new owner.

In the interest of durability, and the fact that the S1000RR made a fantastic amount of power in a smooth, very linear fashion before, and after tuning – we opted to leave well enough alone. In other words, the engine cases have never been opened. The end result is a motorcycle that has proven to be nothing but reliable through and through. After every weekend, brake fluid and engine oil were replaced with Brembo HTC 64T and Motul 300V, respectively. The cooling system is filled using de-ionized water with Redline Water Wetter additive. The bike has a total of 1,154 miles on it, the first ~600 of which, are from the street. Everything has been wrapped in SharkSkinz bodywork with a RidersDiscount.com custom paint job by Andrew Swesnson Design.

A total $26,121.08 in top-shelf aftermarket parts alone, grace this BMW S1000RR for a total retail value of $42,851.08 before taxes and labor! In addition to that, countless hours of skilled assembly, track testing and set up have gone into honing this motorcycle to be a true track weapon.

Weight: 360lbs without fuel
Power: 204hp with VP MR-12
Mileage: 1,154 miles
Asking $30,000 with clean title.

The bike has never been crashed. Located at RidersDiscount.com headquarters in Holland, Michigan, interested parties should contact TJ at 866.931.6644 x 817.

Chassis
Marchesini Forged Magnesium 10-Spoke Wheels in Black $3,995.00
Custom RidersDiscount.com Paint Scheme by Andrew Swenson $1,000.00
Attack Performance Adjustable Triple Clamps in Black with #4 Offset $995.00
SharkSkins BMW S1000RR Bodywork $974.00
MotoHolders Lightweight Aluminum Subframe $460.00
Most OEM TORX Hardware Replaced with Pro-Bolt Titanium Hardware $450.00
MotoHolders Fairing Stay Bracket $184.00
Akrapovič "Kit" Carbon Fiber Exhaust Hanger $142.95
LighTech Twist-Off Fuel Cap $125.95
Zero Gravity OEM-Style Replacement Windscreen $89.95
Yoshimura Swingarm Axle Adjuster Blocks $74.95
Pro-Bolt Titanium Front & Rear Axle Nuts $65.00
StompGrip Tank Grip $54.95
FastBikes USA Paddock Stand Bobbins $32.95

Suspension
Traxxion Dynamics AK-Gas Fork Internals with Fork Cap Extenders $1,999.95
Penske Rear Shock $1,190.00
Öhlins Steering Damper $329.00

Brakes
Brembo Nickel-Plated Monobloc Brake Calipers $4,554.00
Brembo 19x18 Billet Master Cylinder with Folding Lever $742.56
Brembo Full-Floating Front Brake Rotors $660.00
ABM Peak EVO Semi-Floating Rear Brake Rotor $249.95
Spiegler Custom 1 into 2 Steel Braided Brake Line $159.95
Brembo Z04 Race Brake Pads $142.56
Spiegler Steel Braided Rear Brake Line $59.95
HRC Kit Rear Brake Fluid Reservoir $32.58

Electronics
ECU Reprogrammed by BMW Motorrad, Germany $2,000.00
Dynojet PC-V Mapped with MR-12 & AMA Spec Fuel $369.95
Ballistic Performance 8-Cell LiFePO2 Battery $159.99
HRC On/Off Switch on Left Handlebar (ignition removed) $27.13

Engine
Akrapovič Evolution Full Titanium Exhaust System w/ Titanium Muffler $2,157.95
BMC CRF Carbon Racing Filter Air Filter $358.95
Yoshimura Case Savers $195.00
Cox Racing Group Radiator Guard in Black $179.95
Samco Sport Silicone Radiator Hose Kit with Oetiker Clamps in White $151.95
Motul 300V Synthetic Motor Oil 10W40 $62.95
Driven Racing AIS Block Off Plates $34.95
Motion Pro Fluid Overflow Bottles for Radiator and Fuel $31.99
Yoshimura Oil Filler Cap in Black $23.95
Yoshimura Timing Inspection Cover in Black $23.95
K & N Engineering Oil Filter $14.95

Controls
Attack Performance Adjustable Rearsets $549.99
Attack Performance 55mm Clip-Ons $250.00
Brembo Remote Brake Lever Adjuster $244.43
Synto Adjustable Clutch Lever $149.00

Drivetrain
D.i.D ERV3 520 Chain $252.95
Renthal Ultralight Front Sprocket $79.95
Renthal Ultralight Rear Sprocket $35.95

The bike has never been crashed. Located at RidersDiscount.com headquarters in Holland, Michigan, interested parties should contact TJ at 866.931.6644 x 817.
Weight: 360lbs without fuel
Power: 204hp with VP MR-12
Mileage: 1,154 miles
Asking $30,000 with clean title.

Everything detailed above will be included with the motorcycle.

 

Drool . . . . . . .Even if I could afford this without taking out a loan, i don't think I could race it because I would be wayyyyyyyyy too afraid to crash it. . . GLWS . . . . I'm sure someone on this forum has the money to burn on this beauty

 

Here is a link to our build on the S1000RR forum if you want to see anymore detailed photo's

http://www.s1000rrforum.com/forum/riders-discount/1442-riders-discount-s1000-rr-race-bike.html

 

Here's exactly how the bike looks today. We'll even leave the GoPro and Contour camera mounts on there!

 

I just lost my breath. WOW!

 

That bike is amazing. Wish I had that kinda cash for it. Good luck with the sale. Whoever gets this bike will be very luck.

 

Can I just sit on it? Just once? Just for a minute to see how it feels? LMAO still drooling . . .

 

That is one Sweet Bike!!
Why in the world are you guys selling it?
Its not even really a year old yet?

Any chance you have any inside info on who is riding at the AMA level for RD?

I have enjoyed keeping tabs on you guys!!!!

Ed

 

Ed,

That is a great question. We have a few project bikes right now and the boss wanted one sold before another was purchased. As far as the AMA level, we have a couple different options but haven't made any decisions yet.



Here is a video of the bike at the end of September running a low 19 at Grattan (50 degrees with a light mist)

http://www.youtube.com/watch?v=FD-tytrksdk

 

That video made the front straight look really short.
Great action on the suspension!
Great build and wish i had the money.

 

How much for the GSXR 1k?

 

Don't have any GSXR1000's currently.

 

Such a badass bike, if i could afford something like that I would be all over it sucks being a broke ass college student.

 

SOLD!