1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CB350 sale

Discussion in 'WERA Vintage' started by lizard84, Sep 8, 2009.

  1. lizard84

    lizard84 My “fuck it” list is lengthy

    For Sale:

    Health force's sale of CB350 race bike.

    BIKE DESCRIPTION
    The idea when I started switching things around on this bike was a single disc Wera V1/V2, AHRMA F250 bike

    I rode it once at Jennings and bent a valve. Buff rebuilt the engine and installed a PVL on the motor. Much of the engine/trans info comes from his ad when I got interested in the bike. All top end parts are fresh including cam, rockers and pistons. It is set up with .038” squish with a copper head gasket and CR is 11.4:1 It has professional port finishing and a radius cut valve job. The fuel tank is a alloy piece of rolling art. CR gearbox.

    I removed the shitty CB750 fork tubes which were painted black to cover somewhat the heavy pitting in the triple clamp area. I have Fair condition XS tube on the CB750 triple, I have the seals to rebuild the forks along with Mike's XS version of emulator valves, springs, old style boots to cover the fork
    tubes. XS650 brake parts that need rebuilt ( I have the caliper rebuild kit from Mike's XS) brand new SS line, brand new front brake master cylinder with lever from Mike's XS.

    CHASSIS:
    Cb 350 chassis fully race prepped. All brackets and tabs removed. Seams welded and additional bracing added for stiffness.
    Koni adjustable rear shocks
    XS650 35mm front end
    Alloy rear wheel spacers and engine spacer
    Adj. steering dampener with alloy downtube mount
    35mm clipons
    Hand made Aluminum racing tank with pingel dual outlet petcock
    Ex. Henning Vesco seat



    WHEELS/TIRES:

    Front rim at present is a 19” stock steel XS rim with Yamaha 920 rotor (much thinner/lighter then stock)

    extra XS650 hub

    Rear tire: 18” Avon AM23 Supervenom on alloy rim

    Rear brake and Hub is stock Honda 350

    32,33,34 unused alloy rear gearing, 35 on the bike



    ENGINE:
    Yoshimura Close ratio gearbox- from Honda’s RSC kit according to Buff
    Balanced and polished crankshaft
    Racing cam chain with metal roller chain tensioner
    PVL
    Barnett clutch and spring kit
    THR 67.5mm forged piston kit
    Dual plugged head (4 plugs)
    Oversized stainless valves and bronze guides
    RD valve springs with titanium tops
    THR Megacycle X-5 cam
    Mikuni 34mm carbs
    Kickstarter and starter hole blocked off.

    I'll post more info and some photos when as I can.

    I'd like to get $3500 for everything but I'll entertain ANY offer, Its true, it isn't ready to wheel onto hot pit just yet but the sum of its parts are worth more then the above amount. That being said, its also true that we need the cash.

    Anyone interested can PM me.
     
  2. lizard84

    lizard84 My “fuck it” list is lengthy

    tank pic
     

    Attached Files:

    • tank.jpg
      tank.jpg
      File size:
      36.7 KB
      Views:
      169
  3. CharlieY

    CharlieY Well-Known Member

    Sorry to hear about the health issues bob......I bought Steve-O's bike a short while ago, and was hoping to run you on this bike.

    Good luck with the sale.

    That tank is frikkin sweet. :up:
     
  4. Tinfoil hat charly

    Tinfoil hat charly Well-Known Member

  5. OHIOCAFERACER

    OHIOCAFERACER Pavement Gods Translator!

    Bob....sorry to hear you have to sell the bike.

    From the few pics i've seen of your bike.....its a looker for sure.....hell of a deal.
    I had a hard time selling that tank.....of all the tanks i've built......thats one of my fav's!! ;)

    Hope things turn around for the better soon......get well!!
     
    Last edited: Sep 9, 2009
  6. freedomgli

    freedomgli Well-Known Member

    That's a killer deal for sure. I can't afford it now otherwise I'd be on my way to sunny Florida this instant. Good luck with the sale. If you decide to sell the tank separately I'll buy it from you.
     
  7. rus23

    rus23 Misfit

    Sorry to hear that Bob, get better, we miss you up here.
     
  8. lizard84

    lizard84 My “fuck it” list is lengthy

    a few photos
     

    Attached Files:

    • -9.jpg
      -9.jpg
      File size:
      42.2 KB
      Views:
      769
    • -8.jpg
      -8.jpg
      File size:
      36.7 KB
      Views:
      240
    • -7.jpg
      -7.jpg
      File size:
      36.6 KB
      Views:
      241
    • -6.jpg
      -6.jpg
      File size:
      34.6 KB
      Views:
      189
    • -5.jpg
      -5.jpg
      File size:
      36.2 KB
      Views:
      181
  9. lizard84

    lizard84 My “fuck it” list is lengthy

    more
     

    Attached Files:

    • -4.jpg
      -4.jpg
      File size:
      39.5 KB
      Views:
      102
    • -3.jpg
      -3.jpg
      File size:
      34.8 KB
      Views:
      137
    • -2.jpg
      -2.jpg
      File size:
      33.7 KB
      Views:
      82
  10. CharlieY

    CharlieY Well-Known Member

    Hey Lizard....is that a Lizard?:D ..on the sprocket...
     
  11. lizard84

    lizard84 My “fuck it” list is lengthy



    Gecko to be exact :)

    They are everywhere down here
     
  12. lizard84

    lizard84 My “fuck it” list is lengthy

    If anyone needs better pics let me know, I'll email larger file sizes.

    And again.

    I'll entertain any & all offers
     
  13. lizard84

    lizard84 My “fuck it” list is lengthy

    Bumping it to the top of the page, got to go.
     
  14. donovangravlee

    donovangravlee Active Member

    cool bike !
     
  15. lizard84

    lizard84 My “fuck it” list is lengthy

    I 'll make you a sweet deal !
     
  16. Parr

    Parr Well-Known Member

    I am looking to run a 350 next year (for the first time). A couple of questions:

    - what is required to get this into a finished runner?
    - what classes will it be fully legal for?
    - will Buff vouch for the bike?

    Thanks
     
  17. lizard84

    lizard84 My “fuck it” list is lengthy

    1: to get running:

    It needs a 18 inch rim laced to the hub.

    I have 2 used front race tires, a Dunlop KR825 & an Avon am22 110, it has a avon 120 race tire on the rear

    Brake pads from vintage brake for the front brake caliper (caliper needs rebuilt, I have the kit from Mike's XS)

    The coils system for the new PVL need mounted

    Forks need rebuilt, I have new fork seals, springs & Mike's XS emulators for the job. The old honda forks from a CB750 go with the bike also.


    2: Classes:

    Wera's Vintage 1 & 2, Ahrma's F250 with a disc, if you mounted up a drum on the honda forks Ahrma's 350 & 500 sportsman

    3: Will Buff Vouch for the bike?

    I'm certain he will, contact him, Buff, if you see this feel free to chime in if you want.




    This bike will be a major threat for not only race wins but a championship in capable hands.
     
  18. footwork

    footwork Honda Research Analyst

    I will pull up the details on the engine...
     
  19. lizard84

    lizard84 My “fuck it” list is lengthy

    Got to go.

    Will arrange to meet somewhat in the middle for those that live a good distance away from my beach abode.

    Or a sojourn on Sunset beach perhaps...
     
  20. lizard84

    lizard84 My “fuck it” list is lengthy

    Trying to post a higher res photo
     

    Attached Files:

    • -10.jpg
      -10.jpg
      File size:
      311.5 KB
      Views:
      158

Share This Page