Hey Ford PSD guys, what's this part?

Discussion in 'General' started by crazywolf450r, Mar 27, 2017.

  1. crazywolf450r

    crazywolf450r Well-Known Member

    IMG_0912.JPG Currently doing the EGR delete and oil cooler replacement on a 6.0, and Found this in my oil drain pan after draining my oil cooler. But I can't find any mention of this part in any literature. Can one of you guys can shed some light?
     
  2. R Acree

    R Acree Banned

    That's a fetzer valve. Just use a little 3 in 1 oil.
     
  3. crazywolf450r

    crazywolf450r Well-Known Member

    And 10 quarts of antifreeze :crackup:
     
  4. ClemsonsR6

    ClemsonsR6 Well-Known Member

    Ball bearings and anti-freeze, you need to make the switch now.

    Dont you know anything boy??? Its all ball bearings now a days!
     
  5. fastfreddie

    fastfreddie Midnight Oil Garage

    My guess is a one-way valve to either keep the cooler from draining or to keep the oil farther up the line from draining. Does it fit in the fitting you disconnected to drain the cooler?
     
    Last edited: Mar 27, 2017
    crazywolf450r likes this.
  6. ChemGuy

    ChemGuy Harden The F%@# Up!

    Thats a henweigh.
    Cant drive very far without it.
     
  7. Lawn Dart

    Lawn Dart Difficult. With a big D.

    You really need to get some fallopian tube to connect to it and clear it out first.
     
  8. crazywolf450r

    crazywolf450r Well-Known Member

    Ok, that one got me. :crackup:
     
  9. ChemGuy

    ChemGuy Harden The F%@# Up!

    Your supposed to ask out loud....:crackup:
     

Share This Page