1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

[For sale] Honda RS250 with many parts

Discussion in '2-Stroke Machines' started by aalex, Apr 12, 2012.

  1. aalex

    aalex Member

    I'm selling my Honda RS250. It is a 1996 model.
    I just used on track days and never on races.

    [​IMG]
    Other pictures --> http://s1266.photobucket.com/albums/jj525/coralex1/

    I made a total rebuild last year

    All chassis bearing have been changed

    Engine : Total rebuild too. All gaskets and bearings have been changed. I used the RSCycle rebuild kit http://www.rscycles.com/rebuild_packs.htm#rs250
    I mounted new barrels (not replated but new) + new crankshaft. They ran 650 Km
    I changed all clutch disks and plates
    The carbs are bored
    The exhaust is a TSR with carbon jolly moto silencers

    Today :

    Front fork has just been "rebuild" --> oil seal changed + new oil
    rera shock has just been "rebuild" --> new oil
    Tyres are like new (100 km)
    I just rebuilt the top engine.
    Barrels have been checked. They are perfect.
    I just mounted 2 new pistons, with new rings, nuts, bearings and gaskets.
    Crankshaft has been clocked (checked by dial gauge) and re-aligned

    The gearbox was too short. So i just changed the 3rd, 4th, 5th and 6th gears. I used the standard gears.
    But i kept the short 1st and 2nd.

    There is a Brembo PR19 master cylinder and new AP Racing front brake pads


    Spares:

    2 wheels with discs and wet tyres (in very good condition)
    2 barrels (just replated)
    2 new heads cylinder
    1 crankshaft (500 km) - clocked (checked by dial gauge) and re-aligned
    1 set of original pipes
    2 originals silencers
    2 new Tyga silencers
    1 clutch set (outer comp + center + plate pressure)
    1 ECU box
    full set of front and rear sprockets
    full set of jets
    2 new handle bars
    3 used handle bars
    1 complete rear brake system
    4 new spark plugs
    3 used spark plugs
    2 used caps
    2 valve throttle
    1 new throttle cable
    1 new clutch cable
    1 HRC manual
    1 new rear set
    2 used holder step
    2 used brake pedal

    + many new parts (bearings, gaskets, clips, clutch disks and plate, bolts, dowel pin, nuts, washers, valve reed, springs, rings, ...)
    + many used but usable parts

    2 rear paddock stands and 1 front paddock stand.


    The price : 10 000 euros

    I'm in France. I know a English carrier (Chas Mortimer ex TT racer) who ship bike all over the world --> http://www.chasmortimer.com/
     
    Last edited: Apr 12, 2012
  2. aalex

    aalex Member

    sold !
     

Share This Page