Two new in box, never used EBC rotors. - $150 for both, prefer local, but will ship, buyer pays shipping. This is a steal considering one sells for over $200. I test fit them in a USPS medium box, they both fit without their boxes at an angle, but I did not try to pack them my normal super secure drop it from ISS and it land on a rock with no damage packaging. So they "might" fit in a flat rate USPS med box.......might... They appear to be identical except one center is powder coated Gold and one is polished and lacquered. You could easily remove the powder coat and clean up for a match, or if you wanted to go all show could polish and lacquer it afterwards. Boxes are a little rough from sitting stacked in the garage for years. They fit: Direct replacement: Suzuki GSXR600 VAV/X/Y/K1/K2/K3/ZK3 1997-2003 Suzuki GSXR750 T/Y/W/X 1996-1999 Suzuki GSXR750 Y/K1/K2/K3 2000-2002 Suzuki GSXR1000 K1/K2 2001-2002 Suzuki TL1000 SV/SW/SX/SY/SK1 1997-2001 Suzuki TL1000 RW/RX/RY/RK1 1998-2002 Suzuki GSX1300 RX/RY/RK1/RK2/RK3 RZK3/RK4/RK5/K6/K7 Hayabusa 1999-2007 Suzuki GSX1400 K1/K2/K3/K4/K5/K6/K7/FE 2001-2007 Should fit with spacers, 10mm spacers – since rotor dia is 298/300mm going up to 320mm Suzuki GSXR1000 K3/K4 2003-2004 Suzuki GSXR600 K4/K5 2004-2005 Suzuki GSXR750 K4/K5 2004-2005 Suzuki SV1000 All years but would require moving calipers out 5mm, also same with SV 650 wheels, they fit 2nd gen SV 650 front wheel bolt pattern, but obviously much larger than stock. IMG_0114 IMG_0112 IMG_0111 IMG_0109 IMG_0107 IMG_0105 IMG_0103 IMG_0115
Thanks Mark and Scotty! Pending Mark, if something goes wrong with Mark, Scotty, they are yours....sorry guys, I was at work in the middle of something.
No problem Mark. Good to see them go to a good home. Sorry Scott.....he beat you out by about 20 minutes...wish I had two sets so I could hook you up as well