Custom 1g sv650 Partout- full leo vince, GSXR forks, GSXR wheels (2 sets), much more

I'm parting out my 1999 sv650, let me know if you're looking for any specific parts. Everything in THIS PIC is for sale, plus many more parts I'm pulling out of storage.

ALL PRICES ARE O.B.O! Please feel free to make me an offer.

I'm located in Bowie, MD (15 miles east of D.C.), everything is available for local pick-up for a discount or I can ship anywhere in the CONUS for the below listed prices.

I will continue to update this thread as I add/sell items.

1st Gen sv650 Engine- $750 shipped ($600 local pick-up)
Please see THIS VIDEO for proof of life. Very clean, superb runner, 25k on the clock. Woodcraft clutch cover, 2nd gen intake cam swap (stock exhaust cams pictured/included), '04 shift star upgrade (stock pictured/included), magneto cover/valve covers/water pump housing/clutch side case has been powder coated gloss black, block painted with VHT hi-temp satin black and is in great shape. Lots of stainless steel fasteners. Here's the album with all the pics as well as a video walk around: https://photos.app.goo.gl/d8cFQkA83dSsZiLy1

Clean Title Frame/Swinger, Powder Coated Satin Black- $600 shipped ($500 local pick-up)
Undamaged frame, clean title in hand. TWF top bearing race to run GSXR front end. Power coated satin black- couple blemishes/scuffs/nicks documented in the photos (shock not included): https://photos.app.goo.gl/XIjcDNHkk03Df1tt1

K6/K7 600/750 Forks- $400 shipped
Straight, never crashed, no leaks, stanchions/pistons are very clean and pit-free. Tubes are in great shape, couple nicks (see pic). Comes with stock bearings as well as the All Balls replacements and stock steering damper. Top triple is included, but it is modified for my custom headlight mount and will no longer accept an ignition/key lock (see pics): https://photos.app.goo.gl/BgtuGIdYMLaA9OcA2

K6/K7 600/750 Wheelset w/ Pirelli Angel ST Mounted/Balanced- $575 shipped
Pics pending. Great shape, wheels are true, minor nicks/scuffs/scrapes. Comes with a set of Pirelli Angel ST tires (approx 3k miles on the tires, lot's of life left) mounted/balanced. Front and rear brake rotors included, rear sprocket carrier not included.

K6/K7 600/750 Wheelset w/ Michelin Pilot Powers Mounted/Balanced- $525 shipped
Pics pending. Rear wheel is in great shape couple minor nicks/scuffs/scrapes. Front wheel is a little rough, scraped inner rim/hub with a good size ding to the outer rim (rim is still straight/true, just a little wobble at the gouge). Comes with almost brand new (still have the rubber mold nubs on the front, less than 100 miles on the set) Michelin Pilot Powers. Front and rear brake rotors included, rear sprocket carrier not included.

1g Fuel Tank- Silver Paint- $375 shipped
Great shape silver tank, no rust, includes fuel sender and petcock as pictured. One small (3/4") ding/dent near the front and several small paint chips (all touched-up with silver paint)- see pics. Comes with aftermarket gas cap (used to be black anodized, but has faded to a bronze color) as shown. https://photos.app.goo.gl/fyCFfu1iyKqkWIXH2

Leo Vince SBK Full Race Exhaust with Tyga and Delkevic Mufflers- $500 shipped
This exhaust is designed for the 2nd gen, but I modified the rear engine mount to fit the 1st gen (see pics). As this is a modified 2g system, the exhaust pipe is closer to the bottom of the 1g engine than it would be on a 2nd gen motor, but with a little fiddling you will not have any touching of the exhaust/engine. Comes with everything you see in the pics, including both a Tyga short muffler (small dent near the end of the can) and a Carbon Fiber Delkevic (near perfect condition) can. There are a couple extra pieces of exhaust that could be used to fabricate a high-mount system. No dents or rash to the headers/exhaust, just tarnish to the stainless that could be cleaned up with enough time/barkeeper's friend/effort. There are video clips showing the sound from each of the cans as well as several pics here: https://photos.app.goo.gl/xMqvHqSu0RTJlXfK2

Carburetors w/ Ivan's Performance Jet Kit and Ported K&N Race Filter- $175 shipped
Perfectly tuned carbs, clean and running well. Ivan's needles (e-clip on 2nd notch), stock pilot jets/AF screws at 2 1/2 turns and 150# main jets installed all per the jet kit instructions and it runs very well. Fully ported K&N filter included. This set-up requires a full exhaust to perform optimally. I've also included the stock needles as well as 137.5# (stock), 152.5#, 155# and 160# main jets. https://photos.app.goo.gl/jhk0lSByj1Fh5dAj2

1g SVRacing Rearsets w/ spares (black anodized)- $165 shipped
Excellent condition, some minor nicks/scuffs mostly around bolt holes that will be covered when installed. Comes with spare lever/toe nub (never crashed). https://photos.app.goo.gl/aIiTd4LXH3FlE7VX2

Woodcraft 2" Riser Clip-ons (48/50mm) w/ bar end LED turn signals- $160 shipped
Fits the k6/k7 gsxr forks, plus many more I'm sure. Couple minor scratches, otherwise in excellent condition. Comes with LED turn signal mounted in the ends with mating connector if you'd like to install, or just pop them out and run whatever damper/end plugs you want. https://photos.app.goo.gl/TC0c96Ay30VzmBT02

 

GSXR Conversion Kit and 520 Chain/Sprocket Set-Up- $200 shipped
Custom machined spacers, GSXR sprocket carrier and 1g rear brake hanger (also comes with stock 1g axle/hardware)- everything you need to fit a GSXR rear wheel to your 1g sv650 rear. Also including a 110 link EK SRX 520 chain (you'll need a new masterlink) with a 14t and 15t front sprocket (both used, but steel sprockets are in excellent condition) as well as a 45t rear (used, showing some wear- see the pics) and a brand new, never opened 47t rear sprocket. Compatible with the k6/k7 GSXR 600/750 wheelsets listed above (should fit more GSXR rear wheels, I'll update when I find that info). https://photos.app.goo.gl/y00ozpFejlD7Bwnu1

Black T-Rex Front Triple Tree and Rear Motorcycle Stands- $160 shipped
Used, normal amount of wear. Front triple pin is 15.5mm, fits a lot of different bikes- also comes with regular fork lift front stand hardware. These retail at $200 plus shipping- http://t-rex-racing.com/catalog.php?item=186
Here are the pics: https://photos.app.goo.gl/L7NIEpyOgz9H3hih1

1g ECU/CDI Box- $140 shipped
Perfect working order, see proof of life video. https://photos.app.goo.gl/vKEgYtZooX0N5iaC2

Motosliders/Swingarm sliders- $70 shipped
Excellent condition, never been down. https://photos.app.goo.gl/WgwNCVhGv8irHU223

sv1k OEM Chin Spoiler, Black- $90 shipped
OEM chin spoiler/belly pan fairing for the sv1000. Shows light surface scratches/scuffs from living in storage, but I never installed this. https://photos.app.goo.gl/w4AJPOVqmU3mNgTt2

1g Starter- $55 shipped
Working order. Some polishing on the gear teeth- 1 tooth is chipped, but doesn't affect performance (didn't know until I pulled it from the motor). https://photos.app.goo.gl/YBLJVbSkYR4S9Arx1

1g fuel pump- $30 shipped
Perfect working order. https://photos.app.goo.gl/wMXnUWVt1ObkDG0P2

1g Stock Radiator- $25 shipped
No leaks, removed/replaced for cosmetic reasons (pretty rough looking- lots of bent fins, chipped/peeling pain). https://photos.app.goo.gl/ZxWlkw2Yz4pPahX42

1g Delkevic Radiator- $50 shipped
No leaks. Couple of bent fins, but looks great still. Comes with temp/thermostat sender. https://photos.app.goo.gl/MV9TcIdbnVeidczG3

1g Clutch Actuator/Plunger/Pushrod Assembly- $30 shipped
Perfect working order. https://photos.app.goo.gl/kKTuS4E188i3nxxd2

1g Radiator Hoses- $20 shipped
Great shape, no leaks. Comes with stainless hose clamps. https://photos.app.goo.gl/K0I272xJzFGX6emJ3

1g Airbox w/ Oil Catch and Hoses- $35 shipped
Perfect working order, no cracks/leaks. https://photos.app.goo.gl/Wmp2YOv8P5Covhzs2

1g Radiator Fan- $30 shipped
Perfect working order, painted black. https://photos.app.goo.gl/0gHCA3VdZ54hzC3P2

1g Front/Rear Plug Wires/Coils- $15 shipped each, $25 shipped for the pair
Both are in perfect working order- front plug wire has a gouge in the insulation near the plug end, but wire is not exposed and it does not affect function. https://photos.app.goo.gl/6PUidAgK1yGB8r9J3

1g Front Sprocket Cover- $15 shipped
Shows some normal wear, scratches/scuffs- no cracks/breaks. https://photos.app.goo.gl/9ICIBL5U0HIIQuQW2

1g Stock Rear Tail Light- $30 shipped
Wired for integrated turn signals, standard 4 prong trailer-wiring connector (I don't have the mating plug). Perfect working order with normal wear for age. https://photos.app.goo.gl/MZyHIqGEE4kUyXwD2

1g Stock Ignition/Gas Cap/Rear Storage Locks w/ Key- $30 shipped
Ignition switch is a little sticky, but all function as expected- matched set. https://photos.app.goo.gl/CMvfUvodOWTPk9nH2

1g Stock Rear Tail Plastic- $10 shipped
Couple nicks/scrapes and scuffs, should probably be painted if you want it to look nice installed. https://photos.app.goo.gl/xtwB8MtU9JTCLkiy2

1g Stock Radiator Side Covers with LED Turn Signals Mounted- $30 shipped
One turn signal housing is cracked, but functions normally. Mating plugs included for wiring in your project. LED turn signals mount to existing slots in the stock radiator side cover, no damage to original part if you want to remove the LEDs. https://photos.app.goo.gl/2JSF2VwIc0S61y2b2

Joe Rocket Hammerhead Magnetic Tank Bag- $40 shipped
Lightly used. A little dusty with a scuff to the clear plastic covering on one of the window/storage pockets, otherwise in excellent condition. https://photos.app.goo.gl/1CcTc8hY34BvcRsC2

1g Stock Rear Brake Hanger- $15 shipped
A little tarnished, otherwise in perfect working order- no cracks or bends. https://photos.app.goo.gl/rana5WbXfkc9s7Qc2

 

Vrod Headlight/Bracket/Visor and HID Lighting Kit w/ OEM Wire Connectors/Harness- $200 shipped
Excellent condition. OEM Harley-Davidson mounting bracket has been powder coated black, OEM visor is chrome. Comes with standard bulbs as well as an aftermarket HID lighting kit that is plug and play with the included OEM bulb connectors. Couple scratches/nicks in the glass, but very good shape. I removed the lo-beam reflector (these are notorious for breaking inside the headlight assembly and rattling around) which required cutting the headlight housing and epoxying it back together/weather-sealed. https://photos.app.goo.gl/CdLTRJSNi6KJuubE3

Custom Ducati Monster Rear Tail/Subframe w/Li-ion Battery and Remote Ignition System- $300 shipped

This includes everything in the attached photo gallery (also a nice video walk-around to show function): https://photos.app.goo.gl/bbp9zt74p5L7Kyjr2

• Ducati Monster Seat- tiny little tear on one front corner, otherwise great condition, seat bottom modified to fit subframe
• OEM Duc Rear Passenger Seat Cowel- a little rash on one corner, lots of surface scratches- could use a repaint
• Custom Li-ion Battery (1 ½ lbs)- 4s3p of Sony VCT4 18650 cells, no BMS, I’ll include a small cell-checker/volt meter, can be charged by standard Lead Acid charger, tiny size to fit custom undertail
• Custom Subframe- adjustable with aluminum struts/rodends
• Custom Undertail/Plate Holder and Light- Flat base is polycarbonate with 3d-printed ABS parts epoxied to create wiring/battery compartment, bedliner black paint
• LED Rear Tail/Remote Ignition Switch/GSXR Rectifier/Wire Harness- I’m including all electrical components you see in the pics with the modified wiring harness which will be labeled so you can graft onto your project

1g Rear Brake Rotor (x2)- $15 each shipped
Straight, both caliper out between 4.9 and 5.1mm (4.5mm is minimum thickness printed on rotor). https://photos.app.goo.gl/VoHUrCEn3qlmqWhn1

 

Are the frame sliders included with the swingarm sliders for $70?

 

Yes, both included shipped to your door.

Everything listed above is still available, minus the following:

• ECU- sold
• Rear Brake Rotors- both sold
• Stock 1g Radiator- sold

 

Finally got the GSXR wheelset pics and videos done:

Pirelli Angel ST shod k6/k7 600/750 Wheelset Pics

^^^ Hyper-critical Video Evaluation ^^^

Michelin Pilot Power shod k6/k7 600/750 Wheelset Pics

^^^ Hyper-critical Video Evaluation ^^^

 

Two week update and price drops...

ALL PRICES ARE O.B.O! Please feel free to make me an offer!

I'm located in Bowie, MD (15 miles east of D.C.), everything is available for local pick-up for a discount or I can ship anywhere in the CONUS for the below listed prices.

1st Gen sv650 Engine- $750 shipped ($600 local pick-up)
Please see THIS VIDEO for proof of life. Very clean, superb runner, 25k on the clock. Woodcraft clutch cover, 2nd gen intake cam swap (stock exhaust cams pictured/included), '04 shift star upgrade (stock pictured/included), magneto cover/valve covers/water pump housing/clutch side case has been powder coated gloss black, block painted with VHT hi-temp satin black and is in great shape. Lots of stainless steel fasteners. Here's the album with all the pics as well as a video walk around:https://photos.app.goo.gl/d8cFQkA83dSsZiLy1

Clean Title Frame/Swinger, Powder Coated Satin Black- $500 shipped ($400 local pick-up)
Undamaged frame, clean title in hand. TWF top bearing race to run GSXR front end. Power coated satin black- couple blemishes/scuffs/nicks documented in the photos (shock not included): https://photos.app.goo.gl/XIjcDNHkk03Df1tt1


K6/K7 600/750 Forks- $300 shipped
Straight, never crashed, no leaks, stanchions/pistons are very clean and pit-free. Tubes are in great shape, couple nicks (see pic). Comes with stock bearings as well as the All Balls replacements and stock steering damper. Top triple is included, but it is modified for my custom headlight mount and will no longer accept an ignition/key lock (see pics): https://photos.app.goo.gl/BgtuGIdYMLaA9OcA2

K6/K7 GSXR Complete Front Brakes- $120 shipped
This is a complete front brake system/set-up that will fit the 2006 and 2007 GSXR 600 or 750 front end. Minor cosmetic blemishes as seen in the photos, never crashed/no rash. https://photos.app.goo.gl/qL3rBbggP6ws9fnJ2

• OEM Tokico Calipers
• OEM Nissin Master Cylinder and Brake Lever Clamp/Pertch
• OEM/Stock Brake Lever
• Galfer Stainless Steel Brake Lines and Reservoir Sock/Cover
• Galfer Brake Pads FD325G1370 HH Sintered- approx 50% of life left.

2005-2006 Kawi 636 Rear Shock- $50 shipped
OEM Showa K176-00 SA-1 rear damper/shock (originally from a Kawasaki K5/K6 636) was removed in perfect working order. Seals are intact, no leaks. Some chips in the paint/powder coat- well documented in the photos linked here: https://photos.app.goo.gl/ge0QyFp7GAqzFJap1

K6/K7 600/750 Wheelset w/ Pirelli Angel ST Mounted/Balanced- $450 shipped ($400 local pick-up)
Pics pending. Great shape, wheels are true, minor nicks/scuffs/scrapes. Comes with a set of Pirelli Angel ST tires (approx 3k miles on the tires, lot's of life left) mounted/balanced. Front and rear brake rotors included, rear sprocket carrier not included.


K6/K7 600/750 Wheelset w/ Michelin Pilot Powers Mounted/Balanced- $450 shipped ($400 local pick-up)
Pics pending. Rear wheel is in great shape couple minor nicks/scuffs/scrapes. Front wheel is a little rough, scraped inner rim/hub with a good size ding to the outer rim (rim is still straight/true, just a little wobble at the gouge). Comes with almost brand new (still have the rubber mold nubs on the front, less than 100 miles on the set) Michelin Pilot Powers. Front and rear brake rotors included, rear sprocket carrier not included.


1g Fuel Tank- Silver Paint- $325 shipped
Great shape silver tank, no rust, includes fuel sender and petcock as pictured. One small (3/4") ding/dent near the front and several small paint chips (all touched-up with silver paint)- see pics. Comes with aftermarket gas cap (used to be black anodized, but has faded to a bronze color) as shown. https://photos.app.goo.gl/fyCFfu1iyKqkWIXH2

Carburetors w/ Ivan's Performance Jet Kit and Ported K&N Race Filter- $140 shipped
Perfectly tuned carbs, clean and running well. Ivan's needles (e-clip on 2nd notch), stock pilot jets/AF screws at 2 1/2 turns and 150# main jets installed all per the jet kit instructions and it runs very well. Fully ported K&N filter included. This set-up requires a full exhaust to perform optimally. I've also included the stock needles as well as 137.5# (stock), 152.5#, 155# and 160# main jets. https://photos.app.goo.gl/jhk0lSByj1Fh5dAj2

1g SVRacing Rearsets w/ spares (black anodized)- $150 shipped
Excellent condition, some minor nicks/scuffs mostly around bolt holes that will be covered when installed. Comes with spare lever/toe nub (never crashed). https://photos.app.goo.gl/aIiTd4LXH3FlE7VX2

Woodcraft 2" Riser Clip-ons (48/50mm) w/ bar end LED turn signals- $120 shipped
Fits the k6/k7 gsxr forks, plus many more I'm sure. Couple minor scratches, otherwise in excellent condition. Comes with LED turn signal mounted in the ends with mating connector if you'd like to install, or just pop them out and run whatever damper/end plugs you want. https://photos.app.goo.gl/TC0c96Ay30VzmBT02

sv1k OEM Chin Spoiler, Black- $90 shipped
OEM chin spoiler/belly pan fairing for the sv1000. Shows light surface scratches/scuffs from living in storage, but I never installed this. https://photos.app.goo.gl/w4AJPOVqmU3mNgTt2

1g Starter- $45 shipped
Working order. Some polishing on the gear teeth- 1 tooth is chipped, but doesn't affect performance (didn't know until I pulled it from the motor). https://photos.app.goo.gl/YBLJVbSkYR4S9Arx1

1g fuel pump- $25 shipped
Perfect working order. https://photos.app.goo.gl/wMXnUWVt1ObkDG0P2

1g Delkevic Radiator- $50 shipped
No leaks. Couple of bent fins, but looks great still. Comes with temp/thermostat sender. https://photos.app.goo.gl/MV9TcIdbnVeidczG3

1g Clutch Actuator/Plunger/Pushrod Assembly- $20 shipped
Perfect working order. https://photos.app.goo.gl/kKTuS4E188i3nxxd2

1g Radiator Hoses- $20 shipped
Great shape, no leaks. Comes with stainless hose clamps. https://photos.app.goo.gl/K0I272xJzFGX6emJ3

1g Airbox w/ Oil Catch and Hoses- $25 shipped
Perfect working order, no cracks/leaks. https://photos.app.goo.gl/Wmp2YOv8P5Covhzs2

1g Radiator Fan- $25 shipped
Perfect working order, painted black. https://photos.app.goo.gl/0gHCA3VdZ54hzC3P2

1g Front/Rear Plug Wires/Coils- $15 shipped each, $25 shipped for the pair
Both are in perfect working order- front plug wire has a gouge in the insulation near the plug end, but wire is not exposed and it does not affect function. https://photos.app.goo.gl/6PUidAgK1yGB8r9J3

1g Front Sprocket Cover- $10 shipped
Shows some normal wear, scratches/scuffs- no cracks/breaks. https://photos.app.goo.gl/9ICIBL5U0HIIQuQW2

1g Stock Rear Tail Light- $20 shipped
Wired for integrated turn signals, standard 4 prong trailer-wiring connector (I don't have the mating plug). Perfect working order with normal wear for age. https://photos.app.goo.gl/MZyHIqGEE4kUyXwD2

1g Stock Ignition/Gas Cap/Rear Storage Locks w/ Key- $20 shipped
Ignition switch is a little sticky, but all function as expected- matched set. https://photos.app.goo.gl/CMvfUvodOWTPk9nH2

1g Stock Rear Tail Plastic- $10 shipped
Couple nicks/scrapes and scuffs, should probably be painted if you want it to look nice installed. https://photos.app.goo.gl/xtwB8MtU9JTCLkiy2

1g Stock Radiator Side Covers with LED Turn Signals Mounted- $20 shipped
One turn signal housing is cracked, but functions normally. Mating plugs included for wiring in your project. LED turn signals mount to existing slots in the stock radiator side cover, no damage to original part if you want to remove the LEDs. https://photos.app.goo.gl/2JSF2VwIc0S61y2b2

Joe Rocket Hammerhead Magnetic Tank Bag- $40 shipped
Lightly used. A little dusty with a scuff to the clear plastic covering on one of the window/storage pockets, otherwise in excellent condition. https://photos.app.goo.gl/1CcTc8hY34BvcRsC2

1g Stock Rear Brake Hanger- $10 shipped
A little tarnished, otherwise in perfect working order- no cracks or bends. https://photos.app.goo.gl/rana5WbXfkc9s7Qc2

Everything listed above in this post is still available, everything listed below has sold from the original post:

• ECU- SOLD
• Rear Brake Rotors- SOLD
• Stock 1g Radiator- SOLD
• Motosliders/Swingarm sliders- SOLD
• Black T-Rex Front Triple Tree and Rear Motorcycle Stands- SOLD
• GSXR Conversion Kit and 520 Chain/Sprocket Set-Up- SOLD
• Leo Vince SBK Race Exhaust w/ Mufflers- SOLD

 

Sold some more things and price drops...

ALL PRICES ARE O.B.O! Please feel free to make me an offer!

I'm located in Bowie, MD (15 miles east of D.C.), everything is available for local pick-up for a discount or I can ship anywhere in the CONUS for the below listed prices.

Clean Title Frame/Swinger, Powder Coated Satin Black- $400 shipped ($300 local pick-up)
Undamaged frame, clean title in hand. TWF top bearing race to run GSXR front end. Power coated satin black- couple blemishes/scuffs/nicks documented in the photos (shock not included): https://photos.app.goo.gl/XIjcDNHkk03Df1tt1



K6/K7 600/750 Forks- $275 shipped
Straight, never crashed, no leaks, stanchions/pistons are very clean and pit-free. Tubes are in great shape, couple nicks (see pic). Comes with stock bearings as well as the All Balls replacements and stock steering damper. Top triple is included, but it is modified for my custom headlight mount and will no longer accept an ignition/key lock (see pics): https://photos.app.goo.gl/BgtuGIdYMLaA9OcA2

K6/K7 GSXR Complete Front Brakes- $100 shipped
This is a complete front brake system/set-up that will fit the 2006 and 2007 GSXR 600 or 750 front end. Minor cosmetic blemishes as seen in the photos, never crashed/no rash. https://photos.app.goo.gl/qL3rBbggP6ws9fnJ2

• OEM Tokico Calipers
• OEM Nissin Master Cylinder and Brake Lever Clamp/Pertch
• OEM/Stock Brake Lever
• Galfer Stainless Steel Brake Lines and Reservoir Sock/Cover
• Galfer Brake Pads FD325G1370 HH Sintered- approx 50% of life left.

2005-2006 Kawi 636 Rear Shock- $40 shipped
OEM Showa K176-00 SA-1 rear damper/shock (originally from a Kawasaki K5/K6 636) was removed in perfect working order. Seals are intact, no leaks. Some chips in the paint/powder coat- well documented in the photos linked here: https://photos.app.goo.gl/ge0QyFp7GAqzFJap1

K6/K7 600/750 Wheelset w/ Pirelli Angel ST Mounted/Balanced- $350 shipped ($300 local pick-up)
Pics pending. Great shape, wheels are true, minor nicks/scuffs/scrapes. Comes with a set of Pirelli Angel ST tires (approx 3k miles on the tires, lot's of life left) mounted/balanced. Front and rear brake rotors included, rear sprocket carrier not included.


K6/K7 600/750 Wheelset w/ Michelin Pilot Powers Mounted/Balanced- $350 shipped ($300 local pick-up)
Pics pending. Rear wheel is in great shape couple minor nicks/scuffs/scrapes. Front wheel is a little rough, scraped inner rim/hub with a good size ding to the outer rim (rim is still straight/true, just a little wobble at the gouge). Comes with almost brand new (still have the rubber mold nubs on the front, less than 100 miles on the set) Michelin Pilot Powers. Front and rear brake rotors included, rear sprocket carrier not included.


1g Starter- $45 shipped
Working order. Some polishing on the gear teeth- 1 tooth is chipped, but doesn't affect performance (didn't know until I pulled it from the motor). https://photos.app.goo.gl/YBLJVbSkYR4S9Arx1

1g Delkevic Radiator- $50 shipped
No leaks. Couple of bent fins, but looks great still. Comes with temp/thermostat sender. https://photos.app.goo.gl/MV9TcIdbnVeidczG3

1g Clutch Actuator/Plunger/Pushrod Assembly- $20 shipped
Perfect working order. https://photos.app.goo.gl/kKTuS4E188i3nxxd2

1g Radiator Hoses- $20 shipped
Great shape, no leaks. Comes with stainless hose clamps. https://photos.app.goo.gl/K0I272xJzFGX6emJ3

1g Airbox w/ Oil Catch and Hoses- $25 shipped
Perfect working order, no cracks/leaks. https://photos.app.goo.gl/Wmp2YOv8P5Covhzs2

1g Front/Rear Plug Wires/Coils- $15 shipped each, $25 shipped for the pair
Both are in perfect working order- front plug wire has a gouge in the insulation near the plug end, but wire is not exposed and it does not affect function. https://photos.app.goo.gl/6PUidAgK1yGB8r9J3

1g Front Sprocket Cover- $10 shipped
Shows some normal wear, scratches/scuffs- no cracks/breaks. https://photos.app.goo.gl/9ICIBL5U0HIIQuQW2

1g Stock Rear Tail Light- $20 shipped
Wired for integrated turn signals, standard 4 prong trailer-wiring connector (I don't have the mating plug). Perfect working order with normal wear for age. https://photos.app.goo.gl/MZyHIqGEE4kUyXwD2

1g Stock Rear Tail Plastic- $10 shipped
Couple nicks/scrapes and scuffs, should probably be painted if you want it to look nice installed. https://photos.app.goo.gl/xtwB8MtU9JTCLkiy2

1g Stock Radiator Side Covers with LED Turn Signals Mounted- $20 shipped
One turn signal housing is cracked, but functions normally. Mating plugs included for wiring in your project. LED turn signals mount to existing slots in the stock radiator side cover, no damage to original part if you want to remove the LEDs. https://photos.app.goo.gl/2JSF2VwIc0S61y2b2

Joe Rocket Hammerhead Magnetic Tank Bag- $40 shipped
Lightly used. A little dusty with a scuff to the clear plastic covering on one of the window/storage pockets, otherwise in excellent condition. https://photos.app.goo.gl/1CcTc8hY34BvcRsC2

1g Stock Rear Brake Hanger- $10 shipped
A little tarnished, otherwise in perfect working order- no cracks or bends. https://photos.app.goo.gl/rana5WbXfkc9s7Qc2

Everything listed above in this post is still available, everything listed below has sold from the original post:

• ECU- SOLD
• Rear Brake Rotors- SOLD
• Stock 1g Radiator- SOLD
• Motosliders/Swingarm sliders- SOLD
• Black T-Rex Front Triple Tree and Rear Motorcycle Stands- SOLD
• GSXR Conversion Kit and 520 Chain/Sprocket Set-Up- SOLD
• Leo Vince SBK Race Exhaust w/ Mufflers- SOLD
• Tank- SOLD
• Rad Fan- SOLD
• Fuel Pump- SOLD
• Ignition/Lock Set- SOLD
• Woodcraft Clip-ons- SOLD
• SVR Rearsets- SOLD
• SV1K Chin Spoiler- SOLD
• Engine- SOLD
• Carbs- SOLD

 

Quik I sent U a pm but no response.
I'm interested in the brKe system. I can come pick up.
Text me at 7037172325

Max

 

I’m interested in the Delkevic radiator and hoses. Pm incoming.

 

Sorry for delaying the update of this thread, been selling most of the remainder on ebay: https://www.ebay.com/sch/jwan5000/m...STRK:MESELX:IT&rt=nc&_trksid=p2047675.l2562PM me through here if you want to make a deal on any of the ebay listings.

ALL PRICES ARE O.B.O! Please feel free to make me an offer!

I'm located in Bowie, MD (15 miles east of D.C.), everything is available for local pick-up for a discount or I can ship anywhere in the CONUS for the below listed prices.

Clean Title Frame/Swinger, Powder Coated Satin Black- $350 shipped($250 local pick-up)
Undamaged frame, clean title in hand. TWF top bearing race to run GSXR front end. Power coated satin black- couple blemishes/scuffs/nicks documented in the photos (shock not included): https://photos.app.goo.gl/XIjcDNHkk03Df1tt1



1g Starter- $45 shipped
Working order. Some polishing on the gear teeth- 1 tooth is chipped, but doesn't affect performance (didn't know until I pulled it from the motor). https://photos.app.goo.gl/YBLJVbSkYR4S9Arx1

1g Front/Rear Plug Wires/Coils- $15 shipped each, $25 shipped for the pair
Both are in perfect working order- front plug wire has a gouge in the insulation near the plug end, but wire is not exposed and it does not affect function. https://photos.app.goo.gl/6PUidAgK1yGB8r9J3

1g Front Sprocket Cover- $5 shipped
Shows some normal wear, scratches/scuffs- no cracks/breaks. https://photos.app.goo.gl/9ICIBL5U0HIIQuQW2

1g Stock Rear Tail Light- $15 shipped
Wired for integrated turn signals, standard 4 prong trailer-wiring connector (I don't have the mating plug). Perfect working order with normal wear for age. https://photos.app.goo.gl/MZyHIqGEE4kUyXwD2

1g Stock Rear Tail Plastic- $5 shipped
Couple nicks/scrapes and scuffs, should probably be painted if you want it to look nice installed. https://photos.app.goo.gl/xtwB8MtU9JTCLkiy2

1g Stock Radiator Side Covers with LED Turn Signals Mounted- $15 shipped
One turn signal housing is cracked, but functions normally. Mating plugs included for wiring in your project. LED turn signals mount to existing slots in the stock radiator side cover, no damage to original part if you want to remove the LEDs. https://photos.app.goo.gl/2JSF2VwIc0S61y2b2

Everything listed above in this post is still available, everything listed below has sold from the original post:

• ECU- SOLD
• Rear Brake Rotors- SOLD
• Stock 1g Radiator- SOLD
• Motosliders/Swingarm sliders- SOLD
• Black T-Rex Front Triple Tree and Rear Motorcycle Stands- SOLD
• GSXR Conversion Kit and 520 Chain/Sprocket Set-Up- SOLD
• Leo Vince SBK Race Exhaust w/ Mufflers- SOLD
• Tank- SOLD
• Rad Fan- SOLD
• Fuel Pump- SOLD
• Ignition/Lock Set- SOLD
• Woodcraft Clip-ons- SOLD
• SVR Rearsets- SOLD
• SV1K Chin Spoiler- SOLD
• Engine- SOLD
• Carbs- SOLD
• K6/K7 600/750 Forks- SOLD
  
• K6/K7 GSXR Complete Front Brakes- SOLD
  
• 2005-2006 Kawi 636 Rear Shock- SOLD
  
• K6/K7 600/750 Wheelset w/ Pirelli Angel ST Mounted/Balanced- SOLD
  
• K6/K7 600/750 Wheelset w/ Michelin Pilot Powers Mounted/Balanced- SOLD
  
• 1g Delkevic Radiator- SOLD
  
• 1g Clutch Actuator/Plunger/Pushrod Assembly- SOLD
  
• 1g Radiator Hoses- SOLD
  
• 1g Airbox w/ Oil Catch and Hoses- SOLD
  
• Joe Rocket Hammerhead Magnetic Tank Bag- SOLD
  
• 1g Stock Rear Brake Hanger- SOLD

 

Pm'd

 

I’m not seeing the Ducati monster tail set-up on either list. Did it sell?

 

My mistake, it should be on the sold list along with the Vrod headlight stuff and rear rotors (the perils of not being able to edit the original post ). Aside from the frame, just small parts and cables left. Most complete and up to date listing is the ebay link to my auctions: https://www.ebay.com/sch/jwan5000/m...STRK:MESELX:IT&rt=nc&_trksid=p2047675.l2562

 

I like the look of the Ducati tail on the SV. I might try to fab up the same set-up on my race SV.