Cox Radiator Guards are an inexpensive solution to a potentially very expensive problem; a leaky radiator can lead to not only rashed bodywork, but also an over-heated motor, leaking head gasket … a trip to the hospital – the list goes on and on. These screens come shaped to fit your specific motorcycle and include everything you need for an effortless installation with or without the radiator mounted to your bike. Each guard’s frame is constructed from 5051 aluminum and the expanded aluminum screen is durable, yet lightweight and strong to withstand debris. Call TJ at 866.931.6644 ext 817 to have him send you this ten minute winter project. Email too, works; send those to WERA at RIDERSDISCOUNT dot COM with the subject line RAD GUARD. Simple instructions, sticker-backed foam pads, zip ties and stickers come with every Cox Radiator Guard. To install, first apply the foam pads to the top and bottom of the rad guard. Next, loosely wrap the zip ties through their mounting point at the top of the radiator then screw any hardware in place that goes between the radiator and the guard. In the case of the Daytona 675, there is only one bolt that attaches to the lower part of the screen. Once installed, your radiator is well protected for large debris that could punch a hole or severely dent it, both can compromise your engine’s ability to stay within safe running temperatures.