1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Clutch hub holding tool?

Discussion in 'Tech' started by burnham, Sep 7, 2013.

  1. burnham

    burnham Well-Known Member

    Who makes a good one and where can I get it? The bike is an '04 Aprilia RSVR.

    Thanks.
     
  2. jimfowler

    jimfowler Well-Known Member

    i prefer my oem honda clutch holder. i think it's discontinued but if you can find one it works great.
     
  3. RM Racing

    RM Racing Tool user

    Motion Pro. Any decent dealer.
     
  4. TWF2

    TWF2 2 heads are better than 1

    Make your own, one steel plate and weld handle on it.
     
  5. gixxersmitty

    gixxersmitty Well-Known Member

    I made one as well. I had an old clutch handy. Stacked a couple fiber plates and a couple steel plates together inside the basket to line them up, clamped them together with two small C clamps, drilled some holes through the stack and bolted them to a piece of 1x1 steel angle for a handle. Grips the hub and basket all the way around and I use an impact to remove the nut.
     

Share This Page