Hey Guys, Here are a set of used rotors off a 11-15 ZX10R, but will fit most modern ZX6R. Case in point, I had them on my 2005 ZX6RR and they worked with spacers. If you have a 2005-2018 ZX6R, these will bolt on. If you have stock 310mm rotors (09-18), they are a direct swap. The 05-08 ZX6R's will need 5mm spacers/bolts but will still work no issue. If you have a ZX10R up to a Gen4, these will bolt on in the same manner. These are some of the best rotors you can get. New they are north of $650 for a pair. These have a 5.5mm thick rotor and are 310mm diameter. I used them one trackday and wish I could keep them but I need the money to pay some unforseen medical bills. $375 shipped to the lower 48
If his rotors are 300mm now, all he needs is 5mm spacers and 5mm longer bolts. As far as I know, you shouldn't have to modify the spacers. BTW the zx6 didn't have 310mm rotors until 2013
Thx for the input and yes I have the correct 5mm spacers and longer bolts. The modification is to make the spacers work with stock calipers, since they were made for M4 calipers. I’m a machinist by trade, so it’s a easy task.
Hi there, looks like a bit of wear. What is the exact measurement of rotor width? Inches or metric is fine.