Location: Grand Rapids, MI Bike: 2007 GSXR GSXR 750 Story: the bike seems to have a crack allowing coolant to drain into the oil, so the engine is not viable as a whole. Want parts off the motor that aren't listed? Make an offer! Want the whole motor to dissect on your own? Make an offer! Want parts I don't have listed like sensors, frame, harnesses, swingarm, etc? Make an offer! All prices are before shipping, unless noted TYD. Suspension: 500 - Penske triple clicker. Currently sprung for 180 lbs. Due for service. 450 - Front forks with 30 mm extensions and Traxxion Dynamic internals. Sprung for 180 lbs. Due for service 50 - Springs for forks above for 220 lbs. Electronics: 600 - Bazzaz with QS and TC. The knob for adjusting TC is broken. Can be replaced for $40. QS is set up for GP. 150 - Gauge cluster, stock Brakes: 200 - Brembo RCS19 master cylinder. Can include reservoir and mounting bracket 475 - Brembo Monobloc calipers 130 - Vesrah SS brake pads for monobloc above. NIB. Retail $150 TYD 50 - Brake pads for stock GSXR 750 calipers. NIB. DP racing compound. TYD 50 - Braided lines for front brakes 50 - Rear brake, stock. Full assembly Controls: 90 - Woodcraft clip-ons. Three handle tubes included, two have the slider and some of the bar ground down from lowsides. Still fully functional. Sold 65 - Motion Pro throttle. 1st gen. 30- Stock throttle/switch assembly 300 - Scott's Steering Dampener 180 - Woodcraft rearsets. Some grinding of the left peg. Aesthetic damage only.SOLD 35 - Clutch perch, lever, cable 10 - Clutch lever, stock Wheels: 300 - front and rear set, both with rotors. Wave rotor on rear. Black 300 - front and rear set, both with rotors. Wave rotor on rear. Black 30 - cush drive Body, Tank: 60 - Hotbodies tailpiece. In decent shape. Pics on request. 180- Gas tank. Prestine 100 - Fuel pump. Can include with gas tank above. 35 - Woodcraft frame sliders. Two rights, one left. Black. Prestine. 30 - Zero Gravity Windshield
Pics of tank, for your viewing pleasure. Plastic cover took some abuse, but all the metal is cherry. The keyed gas cap and matching cylinder/key can also be included. Sent from my Pixel using Tapatalk
Pics of the M4 can. Everything not pictured is used but undamaged. No surprises there. Sent from my Pixel using Tapatalk
Pics of the tail piece. Note cracks on the right rear. All bolt holes are intact. Sent from my Pixel using Tapatalk
Correction - further research indicates that you need $130 if you want to replace both the map selector switch and the TC adjustment knob that were damaged. The unit is sold new without these for $780. Let's reduce the price to $550 for the unit, and I'll include the perch ($30 retail) for the switches.
I just quoted shipping to someone in Louisiana, and it was going to be $46 from Michigan. Sent from my Pixel using Tapatalk
Scratch that. Deal fell through. I still have both rim sets and the cush drive / sprocket carrier available. Sent from my Pixel using Tapatalk
I can't claim to know enough to answer this well. Previous owner told me they were OEM from a later model GSXR 1000. Pic below shows B024 embossed on the body. Does that answer the question? Sent from my Pixel using Tapatalk
Yes those are the OEM Brembos that came on 2011 and later 600/750 and 2012 and later 1000's.....different color variations here and there, but same basic model underneath