2015+ Yamaha R1 SBK Partout

Discussion in 'Parts for Sale' started by Blue Junk, Feb 28, 2019.

  1. Blue Junk

    Blue Junk Well-Known Member

    Items came from, but not limited to fitting, 2015+ Yamaha R1. All prices are OBO and will include shipping in lower 48.

    - Frame, with carbon covers (has been crashed, is not damaged) $1200

    - Modified swingarm with underslung caliper bracket and Valter Moto adjusters, Attack Performance lifters/sprocket guard. Was modified from new swingarm, completed with new bearings, welded in a chicken coop. Unit was installed, but has never been used. $3400 as is or $3100 without adjusters.
    [​IMG]
    [​IMG]


    - * Forks with Ohlins FKR 102 cartridge. Setup and installed by Ken Hall with SB suspension. Left tube clip-on was slightly over-torqued and there is a pinch point in the outer tube, should have no effect on functionality. Fork lugs have been modified to accept big brakes, meaning the rear fender mounts are cut off. $2200
    [​IMG]
    [​IMG]


    - Ohlins YA416 TTX GP shock, with 105 spring. $1000
    [​IMG]


    - * Brembo GP4-RR calipers. These are the newer ones that are hard anodized and 108mm mounting. Very minimal use (maybe 2-3hrs.), do not come with disconnects as pictured, but come with new z04 pads as pictured. $2600
    [​IMG]
    [​IMG]


    - Arrow Competition Full Ti system with Race Tech can. 230mm can, 65mm inlet, has small dent in midpipe just before can, can has a small dent as pictured. $950
    [​IMG]
    [​IMG]


    - * Attack Performance clip-ons with Renthal bars (50MM). $180
    [​IMG]


    - Attack Performance rearsets. $325
    [​IMG]


    - Attack Performance triple clamps. Rock pelt damage on top clamp, #2 cups included. $650
    [​IMG]
    [​IMG]


    - Marchesini M10RSCorse Forged Magnesium wheel set in matte black finish, wheels and sprocket carrier only. I don't believe the front has ever been used and the rear may have had one tire use of time on it. $2850
    [​IMG]
    [​IMG]


    - * Brembo SS front rotors. $350
    [​IMG]


    - * Galfer rear wave rotor. $65


    - Galletto SBK Radiator kit(#716). Complete with all hardware, hoses and piping for installation, rock guard. Will also include Samco hoses as used on this bike if requested. $1600
    [​IMG]
    [​IMG]


    - FT Ecu Race Team Electronics Suite. ECU, YEC Wire harness, QS/AB functions and sensors, license will be transferred with sale to new owner. $2100 (will substitute stock harness for -$400 )

    - Rear subframe. $250

    - Fuel tank, with new SE Composites v2 shroud. Tank had minor damage, under new shroud, so pic of damage isn't available. $425
    [​IMG]
    [​IMG]


    - Fuel pump. $60



    If there are additional items that you are looking for, message with specifics and I will see if we can help.

    * These items will fit other bikes. Ask if you're not sure.
     
    Theducatiman likes this.
  2. Blue Junk

    Blue Junk Well-Known Member

    Dash/Meter sold, thank you!
     
  3. Blue Junk

    Blue Junk Well-Known Member

    Radiator is sold. Thanks!
     
  4. Blue Junk

    Blue Junk Well-Known Member

    Clip-ons sold. Thanks!
     
  5. rotax454

    rotax454 Well-Known Member

    Those GP4-RR calipers are really nice pieces. Good price too.
     
  6. Ducti89

    Ducti89 Spending Frank’s money.....

    Really nice kit there.
     
  7. Blue Junk

    Blue Junk Well-Known Member

    Brakes and triple clamps sold!! Thanks again!
     
  8. vick

    vick Active Member

    pm sent
     
  9. Blue Junk

    Blue Junk Well-Known Member

    Wheels and brake rotors with Ti fasteners sold. Thanks!
     
  10. Blue Junk

    Blue Junk Well-Known Member

    PM replied.
     
  11. Blue Junk

    Blue Junk Well-Known Member

    Rearsets sold.
     
  12. HEF211

    HEF211 Well-Known Member

    PM Sent
     
  13. Blue Junk

    Blue Junk Well-Known Member

    Fuel pump sold. Thank you!
     
  14. Blue Junk

    Blue Junk Well-Known Member

    Air filter sold.
     
  15. gsa013

    gsa013 Active Member

    how much the SE tank cover minus the tank?
     
  16. Thunderace

    Thunderace Well-Known Member

    Got the fuel pump last week and it looks great and was packaged very well. Thanks!
     
  17. R6-OZ

    R6-OZ Well-Known Member

    I have been trying to contact the seller but no success... if you're reading this, check your PMs dude! ;)
     
  18. warclok

    warclok Well-Known Member

    I bought the radiator, calipers and triples from blue junk, and he was a pleasure to work with. Great seller and very honest person.

    Thanks again Kory for everything!

    Ruben


    Sent from my iPhone using Tapatalk
     
  19. GRH

    GRH Well-Known Member

    Those parts aren't going to fit your 300 : )
     
    warclok likes this.
  20. warclok

    warclok Well-Known Member

    I’ll make them fit!!!


    Sent from my iPhone using Tapatalk
     

Share This Page