1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2013 Daytona 675R

Discussion in 'Bikes for Sale' started by austinboy406, Dec 14, 2020.

  1. austinboy406

    austinboy406 Member

    Up for grabs is my 2013 675R. I bought the bike brand new in 2015 as a holdover and didn't have the time to ride or build it until 2018. It was raced in SLC for 1/2 of each of the past 2 seasons (7 of 12 rounds total). Mileage is 2230 on the ticker, less considering gearing change. Switched Castrol fluids to Motul from break in. Oil and filter changed after every race round. This thing is on rails. It has won several of our entries, and was on the podium for most (capable of more with a better pilot). Never been down.

    Trumpet parts list



    NADA book 2013 675R $8100.00
    (2300 Miles)


    GP Suspension (F/R) $2844.00

    Ohlins steering damper $395.00

    Attack rear link $225.00

    Attack triples $875.00

    Attack rear sets $475.00

    Spiegler lines $200.00

    Gale speed master $375.00

    Gale speed clutch $269.00

    Gale speed adjuster $104.00

    Carbon fairing stay $175.00

    Triumph Kit ECU $900.00

    Triumph Kit Harness $650.00

    Triumph Block offs $95.00

    Triumph idle adjuster $90.00

    Rapid Bike $695.00

    Rapid Bike “My Bike” $325.00

    CRC Race Body $799.00
    (SBK tail/foam seat)
    R&G Tank Sliders $125.00

    Litech gas cap $175.00

    Full Hindle Exhaust $899.00

    MWR Air Filter $125.00

    Evol Tech clipons $325.00

    Antigravity battery $145.00

    Sato shift arm support $95.00

    Captive Spacers (F/R) $90.00

    D.I.D ERV-3 520 $160.00



    $18,531.00



    SPARES

    Hotbodies full kit $200.00
    (Needs minor glass work, in factory primer)
    Wheel set $500.00

    Rear set pegs $75.00

    Clip on bars $55.00

    3 gearing & Cush drives $150.00

    Fork springs $95.00

    Litech spare cap $175.00

    OEM steels and frictions $560.00
    (NEW STACK)
    $20,341.00


    GB Racing engine case covers were given to me. They are scuffed from previous rider.
    Some stock parts, exhaust, ECU, harness, triples, headstock bearing, ABS unit??

    This bike is literally a turn key race ready, race winning, machine (minus the key delete with race harness) There are probably some other fancy parts I'm forgetting. Prices are for reference only. Rapid Bike mapped and tuned on dyno at Moto Station in SLC on VP U4.4 and made 124hp and 56 lbs torque. If you have any questions or would like more info I'm happy to answer anything I can. Bike has a clean title in hand and is located in SLC. Willing to ship with buyer covering cost and insurance

    Asking price $13,500


    Feel free to call me at (four 0 six) 3 six 0 - five 0 six one
    Or email at [email protected]
     

    Attached Files:

    Thistle and Newyork like this.
  2. Newyork

    Newyork Dip Mode

    That thing is lovely...very nicely done!!
    Someone gonna get a really serious weapon in this bike. Mine is basically stock and it rails...could imagine how this thing feels.

    I think you left Brake-tech Iron Rotors off the list...looks like you changed them not sure if that’s what those are tho.

    GLWS!


    Sent from my iPhone using Tapatalk
     
  3. austinboy406

    austinboy406 Member

    Good eye New York. They are Brake-tech rotors. Thanks for the heads up.
     
    Newyork likes this.
  4. WMRRA #22 - SH

    WMRRA #22 - SH WMRRA #22

    Any chance you would sell the race harness and/or race ECU
     
  5. austinboy406

    austinboy406 Member

    I'm not interested in parting it out at the moment
     
  6. WMRRA #22 - SH

    WMRRA #22 - SH WMRRA #22

    Understandable. I do have a stock harness and ECU to trade plus cash on my end obviously. Let me know if you reach that point.

    Thanks!
     
  7. austinboy406

    austinboy406 Member

  8. austinboy406

    austinboy406 Member

    Bump. Open to offers
     
  9. austinboy406

    austinboy406 Member

    Bump. Someone needs an awesome machine!!
     
  10. austinboy406

    austinboy406 Member

  11. austinboy406

    austinboy406 Member

    Price Drop! $10,500
     
  12. Team_pmr

    Team_pmr Well-Known Member

    Will you sell the spare wheels?
     
  13. ama137

    ama137 Member

    Where in New York is the bike located?
     
  14. Newyork

    Newyork Dip Mode

    Lol this bike is located in Salt Lake City, Utah...my username got you confused I think.


    Sent from my iPhone using Tapatalk
     
  15. austinboy406

    austinboy406 Member

    Not parting anything out yet.
     
  16. austinboy406

    austinboy406 Member

  17. austinboy406

    austinboy406 Member

  18. austinboy406

    austinboy406 Member

  19. austinboy406

    austinboy406 Member

    Sale pending
     
    Newyork likes this.
  20. joshuaYCRS

    joshuaYCRS Member

    Still pending?
     

Share This Page