UPDATED PRICING - $10,000 For sale is my 2012 Ducati 1199 trackbike. Located in Las Vegas, NV. Asking: $10,000, bike only. Spares available for an additional cost. History: Purchased new (MSO in hand) by Brian Healea who at the time worked for Ducati. The bike was stripped down and all street parts were removed. As you can tell from the pictures, it was taken all the way down and rebuilt as a racebike. All of the work was done by Matt Carr at Ducati Indy, Travis Shultze at Ducati Milwaukee, and Ben Fox for the engine work. The bike was sold to me last year from the 2nd owner who only rode it a few sessions at a trackday. I am selling due to develop my skills on a 600. This bike is way too much for me, my loss is your gain. List of Modifications Fox Performance Engines – Ben Fox 1) Balanced crank Ducati Milwaukee - Travis Schultze “TJ” 1) Carillo Rods 2) Balanced crank 3) Mild headwork 4) Thin head gasket 5) Lightened stock flywheel – between Superlegerra & R weight 6) Manual cam timing 7) Tuned for VP U4.4 8) Lots of custom parts for part relocation on frame 9) Frame mods for proper shift clearance 10) Shift mods to take freeplay out of shift lever 11) Air injection removed 12) Rexxer Ecu flashed to raise rev limit to R model and remove closed loop 13) Superstock Termignoni long header kit & Termignoni mufflers ($2500 header kit alone) 14) Both Up Maps for Termignoni exhaust 15) Base of fuel tank shrouded in gold foil. 16) Ducati Performance footpeg kit 10) Ducati Performance racing seat 11) Ducati Performance racing quick-release fuel cap 12) Ducati Performance folding lever kit 13) Ducati Performance tall windscreen 14) Woodcraft case covers 15) Armor Bodies race fiberglass 16) Quick disconnect fuel line 17) MWR Race air filter 18) Titanium bolts 19) Spare battery for cold start 20) Remote key & relocated toggle switch/kill switch 21) Power Commander V 22) Shorai Li-Ion battery relocated 23) Ducati Data Analyzer 24) Updated rear brake with exposed nut/safety wired 25) Fully safety wired Ducati Indy – Matt Carr 1) 53mm Marzocchi Forks with Ohlins NIX30 – 30mm internals 2) Ohlins TTX MKII rear 614 Paintworx – Paul 1) Decals & Paint Approximately 3100 miles on the bike. Unknown when the last motor refresh was completed. Spares: full set of used race bodywork with wrap (can be seen in pictures), full stock black bodywork, brand new black OEM tank, every stock part that came off the bike when new, rear stand, set of stock wheels with rotors. Pictures can be viewed in my original post here: http://forums.13x.com/index.php?threads/2012-ducati-1199-race-track-bike-17-000.326686/#post-4746378
