2011+ GSXR 600 750 part out

I’m parting out my 2011+ GSXR600 racebike. Lots of good stuff available. I will update this post with prices and parts during the weekend. Right now everything is available for sale except for the engine. If interested let me know. Can get parts to Blackhawk Farms this weekend if needed.


Sent from my iPhone using Tapatalk

 

Front forks with Ohlins 30mil cartridges. Serviced last year by TSE- $1500 obo
Penske triple clicker Service by TSE $750 obo
Clean vin frame no title $500
Vortex clipons $75
NRC stator cover $100
Vortex rearsets $200
Vortex gas cap $50
PC V, Autotune $200
Dynojet qs pull sensor $150
Bazzaz zfi tc $200
Hotbodies bodywork red, white, blue
Brembo master cylinder $175
Yoshimura inspection covers $40
Yoshimura full exhaust titanium/carbon fiber muffler $550
Tightails subframe $275
Stock subframe $75
Motion Pro throttle $60
Yoshimura ecu, wire harness with Motion Pro on/off start sw
SBS brake pads $45
Braided brake lines $45
Stock brembo calipers $325
2 Radiators - $150ea
Wheels - black front $200, white rear $150, white set $400
Galfer front brake rotors $200
Stock front brake rotors $100
Speedo $250
Upper fairing bracket $75
Swing arm $75
Throttle bodies $175
Airbox w/ K&N filter $50
Yoshimura case saver right side $40
TRS pins $60
Rear brake master, caliper, braided line $75
Yoshimura swingarm pivot link $200
Regulator rectifier $50


Sent from my iPhone using Tapatalk

 

Yoshimura em pro ecu with wire harness and motion pro on off switch $450.


Sent from my iPhone using Tapatalk

 

I am interested in the PCV and autotune, also can I see pictures of the exhaust?

 

Need radiators and front wheel anything oem switches

 

Occ


Sent from my iPhone using Tapatalk

 

Pcv


Sent from my iPhone using Tapatalk

 

Thanks





Sent from my iPhone using Tapatalk

 

Radiator 1


Sent from my iPhone using Tapatalk

 

Radiator 2




Sent from my iPhone using Tapatalk

 

Wheels have been sold. I don’t have any oem switches.


Sent from my iPhone using Tapatalk

 

Is that a race harness and are you selling the GPR stabilizer?


Sent from my iPhone using Tapatalk

 

It is a race harness and specifically goes with the empro ecu. GPR stabilizer is not for sale


Sent from my iPhone using Tapatalk

 

PM'd

 

UPDATED:Parting out 2011+ GSXR600 racebike.
Front forks with Ohlins 30mil cartridges. Serviced last year by TSE- $1500 obo
Clean vin frame no title $500obo
Vortex clipons $75
Vortex gas cap $50
PC V, Autotune, O2 sensor $200
Dynojet qs pull sensor $150
Bazzaz zfi tc $150
Yoshimura full exhaust titanium/carbon fiber muffler $550
Tightails subframe $275
Stock subframe $75
Motion Pro throttle $60
Yoshimura ecu, wire harness with Motion Pro on/off start sw $450
SBS brake pads $45
Braided brake lines $45
Stock brembo calipers $325
2 Radiators - $150ea
Stock front brake rotors $100
Speedo $250
Upper fairing bracket $50
Swing arm $75
Throttle bodies $175obo
Airbox w/ K&N filter $50
Rear brake master, caliper, braided line $75
Yoshimura swingarm pivot link $200
Regulator rectifier $50


Sent from my iPhone using Tapatalk

 

Radiators are still available.


Sent from my iPhone using Tapatalk

 

FYI, 06-current radiators all fit.

 

I can't really tell by the pictures but the "Yoshimura swingarm pivot link" is it the pivot for the actual swingarm or the suspension linkage that mounts to the bottom of the shock? I only ask because I never knew they made a swingarm pivot link for the 600/750. I thought it was only available on the 1000

 

It mounts to the swing arm, rear shock and frame. Just like the stock one.

 

That sounds like the suspension linkage. Is this it?