As the title states, I'm parting out my 08 R6. The bike had a good life and was well taken care of... Note that the prices do not include shipping. For smaller items I will ship within 2 business days of cleared payment (in most cases it will be within 1 day). Bigger/ heavier items may take a day or two longer. I'm located in Northern NJ and I'm willing to meet or even deliver within reason (particularly the larger/bulky items). You can PM me or contact me at 201 six seven nine - two zero two four (text preferred...I do have a day job) or email salbert14 at gmail dot com. I have pictures of everything here... https://drive.google.com/open?id=1gu-3gNRveWDgUmTT3d89fLHGRPLH7iM_ If you're having trouble seeing them or want me to email you any pics - just reach out. -------------------------------------------------------------------------------------------------------------------------- Frame (w/ clean & clear title) $1,500 Motor (w/ 11K miles [4K street miles] and brand new trans [I have all old parts & paperwork]) $1,500 Forks w/ Ohlins 30 mil kit (.925 spring rate) $1,100 Subframe $175 Swingarm (has wear mark from boot on right side) $100 Red/Black Full Bodywork painted by Andrew Swenson (w/ Zero Gravity windscreen) $625 Blue Upper/Lower painted by Andrew Swenson (w/ Zero Gravity windscreen) $450 2 Tanks (1 black / 1 blue – both come with shroud, tank sliders & stomp grip [price is for each]) $325 Shark Skins seat w/ Graves foam $75 3 Front wheels (2 white / 1 black – all 3 come with rotors [price is for each one]) $100 1 Rear wheel (white with rotor and sprocket carrier & cush drive) $175 1 Rear wheel (white with rotor and NO sprocket carrier or cush drive) $150 1 Rear wheel (champagne WITHOUT rotor and NO sprocket carrier or cush drive) $125 Woodcraft frame sliders (w/ extra puck) $40 Cluster gauge (approx. 11K miles) $200 Gear indicator (Missing face panel but works. Can get a new one from Starlane for a couple dollars) $25 Vortex rearsets (w/ two extra pegs – one slightly rashed) $275 GPR steering stabilizer $250 CABS (w/ Pull Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull QS]) $375 DynoJet Quick Shifter (Push) $125 ECU $200 PC3 (will bundle PC3 & ignition module for $125) $75 Ignition Module for PC3 (will bundle PC3 & ignition module for $125) $75 Fairing Stay $25 Radiator (w/ fans) $125 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $50 Calipers (price for set) $75 Triple tree (upper) $50 Triples tree (lower stem bracket) $125 Motion Pro Quick Turn Throttle $85 Woodcraft clip-ons (w/ bars) $85 Airbox (complete) $75 GYTR Slip on (also have MJS headers if interested) $125 Throttle bodies $50
Where in Jersey are you? The red &black full plastics are for which set in the picture? Perhaps I'm mistaken but there appears to be 2 sets of red plastics?
I’m in Hackettstown. The red and black full set is for the reference pic of the bike that says Beastmode on the side. I also have red and blue upper and lower (there is a reference pic in the file with a yellow absolute sticker on the side). Technically the tail and fender works with both sets so if you wanted the full blue set - that’s possible. Hope that makes sense.
Updated list of what's still available... Pictures of everything can be found here... https://drive.google.com/open?id=1gu-3gNRveWDgUmTT3d89fLHGRPLH7iM_ If you're having trouble seeing them or want me to email you any pics - just reach out (201 six seven nine - two zero two four [text preferred] or email salbert14 at gmail dot com). -------------------------------------------------------------------------------------------------------------------------- Frame (w/ clean & clear title) $1,500 Motor (w/ 11K miles [4K street miles] and brand new trans [I have all old parts & paperwork]) $1,500 Forks w/ Ohlins 30 mil kit (.925 spring rate) $1,100 Subframe $175 Swingarm (has wear mark from boot on right side) $100 Red/Black Full Bodywork painted by Andrew Swenson (w/ Zero Gravity windscreen) $625 Blue Upper/Lower painted by Andrew Swenson (w/ Zero Gravity windscreen) $450 Black Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 Blue Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 *** SOLD *** Shark Skins seat w/ Graves foam $75 *** SOLD *** 3 Front wheels (2 white / 1 black – all 3 come with rotors [price is for each one]) $100 1 Rear wheel (white with rotor and sprocket carrier & cush drive) $175 1 Rear wheel (white with rotor and NO sprocket carrier or cush drive) $150 1 Rear wheel (champagne WITHOUT rotor and NO sprocket carrier or cush drive) $125 Woodcraft frame sliders (w/ extra puck) $40 Cluster gauge (approx. 11K miles) $200 Gear indicator (Missing face panel but works. Can get a new one from Starlane for a couple dollars) $25 *** SOLD *** Vortex rearsets (w/ two extra pegs – one slightly rashed) $275 GPR steering stabilizer $250 CABS (w/ Pull Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull QS]) $375 DynoJet Quick Shifter (Push) $125 ECU $200 PC3 (will bundle PC3 & ignition module for $125) $75 Ignition Module for PC3 (will bundle PC3 & ignition module for $125) $75 Fairing Stay $25 *** SOLD *** Radiator (w/ fans) $125 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $50 Calipers (price for set) $75 Triple tree (upper) $50 Triples tree (lower stem bracket) $125 Motion Pro Quick Turn Throttle $85 *** SOLD *** Woodcraft clip-ons (w/ bars) $85 Airbox (complete) $75 GYTR Slip on (also have MJS headers if interested) $125 Throttle bodies $50
A couple more parts are gone so updating the list... Don't miss out on getting some quality parts. As added incentive, from this point forward prices include shipping (except the motor, but will deliver it for free within reason). Pictures of everything can be found here... https://drive.google.com/open?id=1gu-3gNRveWDgUmTT3d89fLHGRPLH7iM_ If you're having trouble seeing them or want me to email you any pics - just reach out (201 six seven nine - two zero two four [text preferred] or email salbert14 at gmail dot com). -------------------------------------------------------------------------------------------------------------------------- Frame (w/ clean & clear title) $1,500 *** SOLD *** Motor (w/ 11K miles [4K street miles] and brand new trans [I have all old parts & paperwork]) $1,500 Forks w/ Ohlins 30 mil kit (.925 spring rate) $1,100 Subframe $175 Swingarm (has wear mark from boot on right side) $100 Red/Black Full Bodywork painted by Andrew Swenson (w/ Zero Gravity windscreen) $625 *** SOLD *** Blue Upper/Lower painted by Andrew Swenson (w/ Zero Gravity windscreen) $450 Black Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 *** SOLD *** Blue Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 *** SOLD *** Shark Skins seat w/ Graves foam $75 *** SOLD *** 3 Front wheels (2 white / 1 black – all 3 come with rotors [price is for each one]) $100 1 Rear wheel (white with rotor and sprocket carrier & cush drive) $175 1 Rear wheel (white with rotor and NO sprocket carrier or cush drive) $150 1 Rear wheel (champagne WITHOUT rotor and NO sprocket carrier or cush drive) $125 Woodcraft frame sliders (w/ extra puck) $40 *** SOLD *** Cluster gauge (approx. 11K miles) $200 Gear indicator (Missing face panel but works. Can get a new one from Starlane for a couple dollars) $25 *** SOLD *** Vortex rearsets (w/ two extra pegs – one slightly rashed) $275 GPR steering stabilizer $250 *** SOLD *** CABS Autoblipper (w/ Pull Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull QS]) $375 DynoJet Quick Shifter (Push) $125 ECU $200 PC3 (will bundle PC3 & ignition module for $125) $75 Ignition Module for PC3 (will bundle PC3 & ignition module for $125) $75 Fairing Stay $25 *** SOLD *** Radiator (w/ fans) $125 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $50 Calipers (price for set) $75 Triple tree (upper) $50 *** SOLD *** Triples tree (lower stem bracket) $125 Motion Pro Quick Turn Throttle $85 *** SOLD *** Woodcraft clip-ons (w/ bars) $85 *** SOLD *** Airbox (complete) $75 GYTR Slip on (also have MJS headers if interested) $125 *** SOLD *** Throttle bodies $50[/QUOTE]
I have a Brembo RCS 19 to add to the mix, dropped a few prices (Pre-Black Friday sale) and updated the list since a couple more items sold... Pictures of everything can be found here...https://drive.google.com/open?id=1gu-3gNRveWDgUmTT3d89fLHGRPLH7iM_ If you're having trouble seeing them or want me to email you any pics - just reach out (201 six seven nine - two zero two four [text preferred] or email salbert14 at gmail dot com). -------------------------------------------------------------------------------------------------------------------------- Frame (w/ clean & clear title) $1,500 *** SOLD *** Motor (w/ 11K miles [4K street miles] and brand new trans [I have all old parts & paperwork]) $1,375 Forks w/ Ohlins 30 mil kit (.925 spring rate) $1,000 Subframe $125 Swingarm (has wear mark from boot on right side) $75 Red/Black Full Bodywork painted by Andrew Swenson (w/ Zero Gravity windscreen) $625 *** SOLD *** Blue Upper/Lower painted by Andrew Swenson (w/ Zero Gravity windscreen) $425 *** SOLD *** Black Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 *** SOLD *** Blue Tank (with shroud, tank sliders & stomp grip [price is for each]) $325 *** SOLD *** Shark Skins seat w/ Graves foam $75 *** SOLD *** 2 Front wheels (1 white / 1 black – all 3 come with rotors [price is for each one]) $100 2 Rear wheels (white with rotor) $135 1 Rear wheel (champagne/bronze WITHOUT rotor) $120 Sprocket carrier $25 Woodcraft frame sliders (w/ extra puck) $40 *** SOLD *** Cluster gauge (approx. 11K miles) $175 *** SOLD *** Gear indicator (Missing face panel but works. Can get a new one from Starlane for a couple dollars) $25 *** SOLD *** Vortex rearsets (w/ two extra pegs) $250 GPR steering stabilizer $250 *** SOLD *** CABS Autoblipper (w/ Pull Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull QS]) $325 DynoJet Quick Shifter (Push) $125 ***SALE PENDING*** ECU $175 PC3 (will bundle PC3 & ignition module for $125) $75 Ignition Module for PC3 (will bundle PC3 & ignition module for $125) $75 Fairing Stay $25 *** SOLD *** Radiator (w/ fans) $100 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $50 Calipers (price for set) $75 Triple tree (upper) $50 *** SOLD *** Triples tree (lower stem bracket) $115 Motion Pro Quick Turn Throttle $85 *** SOLD *** Woodcraft clip-ons (w/ bars) $85 *** SOLD *** GYTR Slip on (also have MJS headers if interested) $125 *** SOLD *** Throttle bodies $50 Brembo RCS 19 $180 (has a wear mark on lever from Dion Device) Wiring harness (complete with all electrical connectors) $50
Updated list of what's still available... Reach out if you have any questions. -------------------------------------------------------------------------------------------------------------------------- Forks w/ Ohlins 30 mil kit (.925 spring rate) $1,000 Brembo RCS 19 ($180) Subframe $175 Swingarm (has wear mark from boot on right side) $100 1 Front wheels (black – with rotors) $100 2 Rear wheels (white with rotor) $140 1 Rear wheel (champagne/bronze with rotor) $125 Sprocket carrier $25 Vortex rearsets (w/ two extra pegs – one slightly rashed) $250 Autoblipper CABS (w/ Pull Dynojet Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull QS]) $325 DynoJet Quick Shifter (Push) $125 ECU $175 PC3 (will bundle PC3 & ignition module for $125) $75 Ignition Module for PC3 (will bundle PC3 & ignition module for $125) $75 Radiator (w/ fans) $125 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $50 Calipers (price for set) $75 Triples tree (lower stem bracket) $125 Throttle bodies $50 Wiring harness $50
Quite a few items have sold but still have some good stuff left so we're having a Black Friday sale... Pictures of everything can be found here...https://drive.google.com/open?id=1gu-3gNRveWDgUmTT3d89fLHGRPLH7iM_ The season will be here before you know it so get your parts/spares now... Reach out if you have any questions. ----------------------------------------------------------------------------------------------------------------- Armour Bodies Upper & Lower (painted by Andrew Swenson) with Zero Gravity windscreen $375 Autoblipper CABS (w/ Pull Dynojet Quick Shifter [It was rewired to work w/o need to pull clutch so selling it w/ pull Dynojet QS]) $250 Subframe $150 Swingarm $75 2 Rear wheels with rotor (White) $115 each 1 Rear wheel no rotor (Champagne/Bronze) $100 Sprocket carrier $20 Radiator (w/ fans) $100 Triples tree (lower stem bracket) $115 Throttle bodies $50 Wiring harness $50 Cox radiator guard $50 Brake lines (not sure of brand [were on bike when I bought it] have a few nicks in rubber casing) $35 I also have a couple items pending sale that I haven't listed here (Brembo RCS 19, ECU and PC3 & Ignition Module, calipers) that could become available...