2000 SV650 RaceBike $4000OBO

Discussion in 'Bikes for Sale' started by heylewy, Aug 12, 2018.

  1. heylewy

    heylewy Well-Known Member

    • Bike is straight and geometry is solid.

    • GMD built Showa 2001 GSXR 750 forks – aftermarket anti-friction coating, extenders, valving.(9.5kg springs)

    • GMD Billet adjustable triple clamps

    • Penske Triple adjustable shock (650 or 675lb spring)

    • Ohlins linear steering stabilizer

    • Brembo 2 Piece Billet GP front brake calipers with Performance Friction pads (Full race not OEM)

    • Brembo radial master cylinder (Full race not OEM)

    • Powder coated frame and swing arm

    • 5.5" Rear GSXR wheel

    • Captive Spacer kit front and rear

    • Engine
    Spears Spec 2MM over Superbike engine, JE Pistons, Magnafluxed, lightning, Shot Peen, Balanced, Full Superbike head work/ Valve Job from Edco etc. Mega Cams. Makes 83-85 hp

    • Yoyodyne Slipper Clutch

    • 41mm Keihin FCR flatslide carbs

    • Full Akrapovich Titanium exhaust

    • Pace Superbike radiator – (SV specific )

    • Woodcraft clutch cover

    • Sharkskinz bodywork in good shape
    tank has dents but plenty functional holds fuel no problem

    • TransLogic Factory Quickshifter specifically designed for first generation SV’s from Spears.

    • GP Tech faring stay

    • Lightweight Aluminum subframe

    • SPA tachometer with temp and programmable rev light

    • Vortex keyless gas cap

    • Woodcraft frame sliders, Clip-ons,High rear sets, Hand guard

    • Adjustable Folding levers

    • Galfer Front Wave rotors

    • Drilled rear rotor

    • Shorai lightweight battery with Total loss charging system

    • MotionPro Quickturn Throttle

    • Bunch of different Spares
    Rear wheel
    Oil cooler for radiator never installed.
    Rearset parts

    $4000 OBO

    Located in Putnam/ Woodstock area of Connecticut
    Email heylewy@hotmail.com, text, call 860-377 five637
  2. RIB333

    RIB333 Well-Known Member

    E mail sent
  3. Trevor636

    Trevor636 Well-Known Member

    Would u b interested in selling the slipper clutch?
  4. heylewy

    heylewy Well-Known Member

    Not at this point. But thanks for the inquiry, if things change I will keep you in mind.
  5. Trevor636

    Trevor636 Well-Known Member

    Please do, if u decide to part it out there r a few different parts id love to have off of that machine. Thanks!
  6. heylewy

    heylewy Well-Known Member

  7. waq1

    waq1 Member

  8. heylewy

    heylewy Well-Known Member

    What’s your email says they are too big to load
  9. waq1

    waq1 Member

  10. Charles A Manz

    Charles A Manz New Member

  11. heylewy

    heylewy Well-Known Member

    Need an email site says my photos are to big to load
  12. heylewy

    heylewy Well-Known Member

    Last edited: Sep 6, 2018
  13. heylewy

    heylewy Well-Known Member


    Attached Files:

  14. heylewy

    heylewy Well-Known Member


    Attached Files:

  15. heylewy

    heylewy Well-Known Member


    Attached Files:

  16. Markski

    Markski New Member

    Nice machine, I know you're probably not interested in parting things out but if you decide to I'd be very interested in the flat slides. Just please let me know if you decide to sell those separately. Otherwise good luck with the sale.
  17. heylewy

    heylewy Well-Known Member

    Thanks. At this point I'm not parting out, if I do I'll keep you in mind.
  18. heylewy

    heylewy Well-Known Member

  19. heylewy

    heylewy Well-Known Member

  20. heylewy

    heylewy Well-Known Member

Share This Page