1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

08+ Yamaha R6, MotoAmerica 600SS spec, priced to sell

Discussion in 'Bikes for Sale' started by tittys04, Jan 5, 2018.

Tags:
  1. tittys04

    tittys04 Well-Known Member

    I'm selling my 08 R6 to move on to bigger things. This bike is 600SS legal with MA; the frame is an 08 but all of the updates have been performed, including air box and engine updates. It's an ex-graves bike ridden by Chris Filmore, and purchased by me in late 2012, I've owned it since. It's a race bike, it has been crashed and is not off the show-room floor pristine, but it has been very well maintained.

    The list of goodies is as follows:
    • Superstock engine built by Jamie Hanshaw. The engine has 1 season on it, had all new pistons, rings, and valves ($$$) and several gears were also replaced. It's a STRONG engine that shifts very well through all the gears.
    • AK20 carts with fork extenders up front (setup for 175# rider)
    • Ohlins TTX in rear (setup for 175# rider)
    • Sharkskinz body: Body was crashed but professionally repaired and painted by Andrew Swenson. For all intents and purposes, it's a new set of Sharkskinz with a killer Kyle Wyman Racing paint job.
    • Graves TI Exhaust: There is a small dent in the tip of the can, but otherwise it's in great shape.
    • Graves Clip-ons
    • Graves seat pan and cushion
    • Graves quick disconnect upper fairing mounts
    • Graves shark fin
    • Captive shock clevis with hole drilled in sub frame to access the top shock mount
    • YEC Kit ECU with Dynojet QS
    • Vortex rear sets
    • Vortex gas cap
    • Woodcraft engine cases
    • Pitbull Steering damper
    • Vesrah SS pads
    • SS brake lines front and rear
    • Tapered steering stem bearings
    • Fresh fluids (Motul 300V used exclusively, RBF660, and Engine Ice)
    • Speedbleeders all around
    • Lightened rear rotor
    • Brake lever guard
    • Captive rear brake bracket
    • Captive spacers, front and rear (custom, red anodize)
    • 90 deg valve stems
    • Safety wired well beyond WERA/CCS standards
    The bike comes with a second set of Sharkskinz bodywork. It isn't perfect, has been crashed, but is structurally very good and only has minor cosmetic blemishes. The paint on the second set is blue and white.

    The bike does not come with stands or any other spares not listed.

    Price: $7900
    Location: Alexandria, VA

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. tittys04

    tittys04 Well-Known Member

  3. Did you have it dyno'ed? Does it come with any spares?
     
  4. tittys04

    tittys04 Well-Known Member

    It has been on the dyno and tuned. A spare set of shark skins comes with the bike, but that's it as far as spares.
     
  5. cajun636

    cajun636 Honda Junkie.

    Not sure of the dyno sheet but it’s Fast bike for sure
     
    tittys04 likes this.
  6. renegade17

    renegade17 Well-Known Member

    Bump for a nice weakly throttled machine.
     
    JJJerry likes this.
  7. tittys04

    tittys04 Well-Known Member

    Are you still talking about the r6, jakie-poo? :D
     
  8. cajun636

    cajun636 Honda Junkie.

    Dooooooooooo it @renegade17
     
  9. ekraft84

    ekraft84 Registered User

    The sniper on a 600? Oh, how that would make the world all seem right again .. :D
     
    cajun636 likes this.
  10. renegade17

    renegade17 Well-Known Member

    Nope nope nope. I will let you gentlemen have all the C class fun with your Affliction wearing, Eric Church jamming broskis (NTTIATWWT), Ill be in the LWT squad with the rest of the refined, cultured folk. If I were in the market for such a machine this would be a fine one to start with.
     
    cajun636 and RRP like this.
  11. RRP

    RRP Kinda Superbikey

    This is like saying Beetlejuice three times...Broome will be here soon to comment.
     
  12. tittys04

    tittys04 Well-Known Member

    I think the sniper is scared. But I can appreciate his self awareness.
     
  13. tittys04

    tittys04 Well-Known Member

    Bumpity
     
  14. tittys04

    tittys04 Well-Known Member

    I've decided to hold onto the extra bodywork for another project, so I'm going to drop the price to $6900 for a quick sale.
     
  15. tittys04

    tittys04 Well-Known Member

    stop bumping me from the front page!

    :D
     
  16. Cristian1569

    Cristian1569 Active Member

    If you still have the bike text me 2708326558
     
  17. tittys04

    tittys04 Well-Known Member

  18. tittys04

    tittys04 Well-Known Member

    Open to offers
     
  19. tittys04

    tittys04 Well-Known Member

    Still for sale, make an offer.
     
  20. ElroyJetson123

    ElroyJetson123 Well-Known Member

    What front brake Master cylinder is on there ? Thanks
     

Share This Page