1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

07-12 600RR part out

Discussion in 'Parts for Sale' started by CobraRR, Jun 1, 2018.

  1. CobraRR

    CobraRR Well-Known Member

    I'm parting out my 09 CBR600RR race bike. Everything is plus shipping and OBO.

    Frame with bill of sale-$400
    Two subframes. One spray painted black- $150 each
    Radiator-$50
    Gas tank with fuel pump and vortex gas cap-$100
    Swingarm-$40
    Triple tree-$100
    Injectors-$65
    Vortex rearsets-$225
    Front calipers with Vesrah pads-$50
    Rear caliper with steel braided line and master-$40
    MotionPro throttle-$75
    Woodcraft clipons-$100
    Bazzaz ZF-I-$150
    ECU flashed by Farrell Performance-$200
    One front rim with EBC rotors-$400
    One front rim repaired by Wills Rim Repair no rotors-$100
    Two rear rims-$150 each
    Airbox-$50
    Stock wire harness-$40
    Woodcraft frame sliders-$30
    Full set of Armour Bodies race fairings with a few blemishes and a crack on the upper fairing-$350
    Hot Bodies superbike tail, lower, and gas tank cover all with rash and need repairing- open to offers
    Full Leo Vince SBK carbon exhaust-$500
    Coil pack-$20
    Brand new set of Dunlop slicks stored properly 125/80 front 200/55 rear- open to offers
     
    Last edited: Jun 1, 2018
  2. Krypt RR

    Krypt RR Well-Known Member

    Looking for an integrated tail light for 07, you got one?
     
  3. CobraRR

    CobraRR Well-Known Member

    No I do not
     
  4. Mike Lafayette

    Mike Lafayette Well-Known Member

    Would you please post or send me a picture or two of the clip-ons?
     
  5. CobraRR

    CobraRR Well-Known Member

    MotionPro throttle sold
     
  6. delirious09

    delirious09 Member

    What are the conditions of the vortex rearsets? Can you upload or send pics? Thanks!
     
  7. CobraRR

    CobraRR Well-Known Member

    I can send pictures if you give me your email. I can't get my phone to upload pictures on here
     
  8. delirious09

    delirious09 Member

    Pm sent!
     
  9. Mike:p

    Mike:p Well-Known Member

    I’m interested in the Woodcraft clip ons if they are still available. The Woodcraft frame sliders and Hot Bodies superbike tail. Also the full set of Armor Bodies race fairings.
     
  10. CobraRR

    CobraRR Well-Known Member

    Clip-ons are sold. Everything else is still available
     
  11. Mike Lafayette

    Mike Lafayette Well-Known Member

    I know you didn't list them but do you have a quick shifter and/or a keyless gas cap?
     
  12. CobraRR

    CobraRR Well-Known Member

    Gas cap already sold and no quickshifter sorry
     
  13. blamrr

    blamrr Member

    interested in the front rim. PM sent.
     
  14. Daninacan360

    Daninacan360 New Member

  15. mlap5150

    mlap5150 Active Member

    Pm sent
     
  16. Link6

    Link6 Member

    pm sent re: subframe
     
  17. sirthomas80

    sirthomas80 Well-Known Member

    Upper and lower triple? 9208504000
     
  18. Blak3

    Blak3 Member

    Pm about exhaust


    Sent from my iPhone using Tapatalk
     
  19. CobraRR

    CobraRR Well-Known Member

    ***Updated parts list with a few new parts added and dropped prices***

    Frame with bill of sale-$400
    Two subframes. One spray painted black- $125 each
    Gas tank with fuel pump-$65
    Swingarm-$40
    Front calipers with Vesrah pads-$50
    Rear caliper with steel braided line and master-$40
    ECU flashed by Farrell Performance-$75
    One front rim with EBC rotors $300 (will sell rim without rotors for $100)
    One front rim repaired by Wills Rim Repair no rotors-$50
    Two rear rims-$150 each
    Airbox-$50
    Stock wire harness-$40
    Hot Bodies superbike tail, lower, and gas tank cover all with rash and need repairing- open to offers
    Coil pack-$20
    Brand new set of Dunlop slicks stored properly 125/80 front 200/55 rear- open to offers

    **added parts**
    Forks with KTech RDS cartridge with one season on refresh-$800
    Woodcraft engine covers-$200 for both sides with sliders
    Bazzaz autotune-$75
    Shorty levers-$20
    GPR V4 steering damper needs to be serviced-$250
    Cluster with one broken tab-$50
    Sprockets-15t,16t fronts and 38t, 42t rears-$10 a piece
    K&N air filter-$20
    Fairing stay-$15
    Axles-$20
    Starter-$30
    Rectifier-$20
    Tip sensor-$10

    All prices are plus shipping and OBO
     
  20. kyle keaton

    kyle keaton New Member

    Want the k&n and interested in the Bazzaz and can you send me pics of the fairing stay
     

Share This Page