I think your right. All the flash did was remove restrictions and fan temp. That's all I'm noticing. Nothing for fuel management. With the flash...
I need some advice from someone familiar with 07 GSXR 750. It's obviously an older bike but pretty healthy. I went from oem headers and slash cut...
Hello, I am posting this to help find a Ohlins TTX rear shock for my 07 GSXR 750...time to move on from the stock shock Best regards. Also looking...
You were right! The damn caliper pins were not there. Explains the uneven pads.
TWF2 was right! The caliper pins were missing. I ended up getting EBC Prolite with RJL Vesrah pads. I remember how we were talking about it I...
Haaaaha yeah thats the first thing I will think when something breaks, strips, or flies off.
Well called to work before I could measure. The more I think about dropping 900 plus dollars on rotors and pads for this...thats alot of track...
Finally! Not at work. Will be checking the rotor thickness today. Thanks guys for the advice.
It does seem awful expensive. I need to measure the thickness. One rotor is starting to wiggle at the rivets. I have some time but they will need...
Well I talked to Brake Tech. They said a 5mm spacer is not enough to make a difference and the oem bolts can still be used. 910.00 for SS steel...
Thats nice! I hear about this converstion and R6 switch. With doing the Gsxr switch do you have to switch the brake lines?? I just put brand new...
Ehhh. That sucks. Those are the pads I want to try. Brake tech offers Ferado
Good morning I hope! I will give them a call today. I will post some pics hopefully tomorrow when I get to the bike. Sportbike track gear never...
Makes sense for. Thanks for the info. Will have to measure the bolts.
Familiar with the dowels but this bike does not have them. Oem calipers to the forks are aligned while applying front brake and tightened. I do...
Good info. I believe the calipers are flat at the bolt surface. The Brembo bolt kits are for brembo calipers. 5mm is not much maybe the stock...
I guess I got the MC part figured out. Double banjo and washers.
Its about time for rotors. Since Ive been going to the track...Im noticing ALOT of changes with this bike. So if I decide on the Brembo SS rotors...
Do you have front rotors?
RM racing. Thats exactly what was done! The brass oil jet was cut down below the surface and plugged back into the oil port with black silicone....
Separate names with a comma.