Updated list. Sharkskinz Seat Pan with Graves Foam Seatpad (Used in Excellent Shape) - $130 Graves Foam Seatpad (new) - $45 Woodcraft Lever Guard...
Updated list. Sharkskinz Seat Pan with Graves Foam Seatpad (Used in Excellent Shape) - $130 Graves Foam Seatpad (new) - $45 Motion Pro Quick...
Cleaning up my R6 spare parts. Prices in USD and do not include shipping. Parts shipped to the US will ship from 55605 via USPS. Parts shipped...
I'd run it. You won't even see it after 10 laps.
SOLD
I have a used AMB 260 transponder for sale. This does not require a subscription. It comes with all accessories as shown in the picture from...
This.
You said you had your battery on a trickle charger all winter. Are you referring to the lithium ion battery? And what kind of charger were you...
That video shows the user pulling the cartridges out and simply dumping the old oil out. This will not get all the gunk out of the piston...
As mentioned, swap 10-14-15 with previous fiber. I'm also betting that the basket itself has notching in it. I went through the same issues with...
I've replaced these parts several times on various water pumps including R6's and it's pretty straight forward. As stated previously, get the oil...
I think I still have a spare one kicking around. If needed, let me know.
If it's throwing the code, it's putting you in limp mode.
Continuity test the clutch switch to confirm. Then test the starter switch. Sounds like either the starter switch or relay is gone. You can...
Definitely remove the T connectors as I've seen them cause all kinds of issues in a high vibration environment. Another thing to check is to see...
I would guess that you have coils 1 and 2 mixed up. It's easy to do by accident.
I have done both a compression and leak down test. Both are within spec. Holding the starter button longer is something I've been doing for a...
Here's the story. My 08 R6 seems like it's running on 3 cylinders when cold. When I fire it up, the number 3 cylinder does not seem like it's...
I know I couldn't get the Yosh kit ecu software to communicate with the Yosh ecu on a Windows 7 64 bit setup. Works fine on my XP 32 bit install...
So I've been using an old 32 bit laptop with Windows XP for programming my YEC ecu. This setup has worked great without issue. Unfortunatly,...
Separate names with a comma.
