Looking for a know good 2003-2009 sv650 fuel pump
Penske Shock for 07-08 zx6r
In great condition. Typically Penske shocks can be fitted to other models but please do your research
Looking for a clean usable gas tank for a 2008 GSXR 600/750
Everything I am finding is totally smashed.
Please let me know if you have one...
XT Racing Lap Timer bracket for 53mm forks (Ducati, Aprilia etc..)
Will work as a platform mount for many other brands (thus the velcro)
I purchased this from Joma Shop shortly after Nicky passed.
I have never worn it and the band has never been sized...in fact the protective...
2009 SXV 550
Listing this as a feeler. If it sells it sells, if it doesn’t…I will continue to race it
Bike was originally built by Amuari Nunez...
2005 KTM 525 SMR
Thumper Racing built / Modified
570cc Big Bore Kit
78mm Billet Stroker Crank (Stroker and over bore create 600cc)
I have a set of three case covers for a 2007-2008 ZX 6r.
As you can see there is some scuffing from a get off in the dirt. They are still fully...
I have a new, never worn Bell Star Pace XL helmet that I picked up as a back up last season, but won't be needing
I have only tried on the helmet...
I have a GPR v4 Damper with ZX6R mounting kit for sale
If you don't have a ZX6R you can always order the correct mount kit from GPR and sell the...
I have a Penske double clicker shock for a 2007-2008 ZX6R.
Has 500lb spring installed. Typically Penske can change the bottom clevis to fit a...
I have a Push style quick shifter with PC 3 connector for sale.
It has seen very limited use and functions perfectly.
New they are roughly $250...
I have a question for anyone that actually knows the answer. I have been received some conflicting information.
I am in the process of building...
Does anyone have any experience with Zlock Racing...specifically the SV650 Rods they had made and marketed as Zlock brand?
I have found a good...
I have a set of Aplinestars GP Plus V2 leathers in us54/euro 64 (big guy) size for sale
These have only been worn once. Unfortunately they are...
Looking for a good set of intake cams to swap into a stock 2nd gen motor.
Please let me know if you have any.
i have a stock fairing stay from a 2006 SV650.
Removed from a non crashed sv during a race bike build. Everything appears straight
i have a passenger and rider seat for the ‘15 + R1
Removed from a 300 mile bike during a race build. No damage.
*please note. Key for the rear...
I am currently setting up a 2006 SV and could use a little direction
1) Gearing - need to order sprockets. Does anyone have a good base line?...
Building a 2nd Gen SV and in need of a number of things
And probably a number...
Separate names with a comma.