600rr lean angle bypass

Discussion in 'Tech' started by tightR1, Jan 21, 2005.

  1. tightR1

    tightR1 Well-Known Member

    600rr bank angle bypass

    I need some help with bypassing the bank angle sensor on an 03 600rr.If someone could tell me which wires on the main harness,not the front harness.Thanks
     
    Last edited: Jan 21, 2005
    tightR1, Jan 21, 2005
    #1
  2. MD-11

    MD-11 Well-Known Member

    i haven't tried this on mine have had no reason to but from my understanding is your supposed to short the two outside wires on the sensor R/W to the G.

    So for the main harness it shows the "R/W" goes to the same color wire in the main harness on the "12p/gray" connector and the "G" goes to the same color on the "12p/Blue" connector on the main harness.
     
    Last edited: Jan 21, 2005
    MD-11, Jan 21, 2005
    #2
  3. GrahamB

    GrahamB Well-Known Member

    Why? I crashed my GSXR last weekend and I was quite glad the sensor turned the bike off for me while I was lying back enjoying my fracture. The newer ones don't seem to give the problems the primitive ones on the 03 and earlier GSXR's did.

    All the World SS bikes are required to use them and they seem to work ok...
     
    GrahamB, Jan 22, 2005
    #3
  4. tightR1

    tightR1 Well-Known Member

    I'm just tryingto get the bike running right now.Thanks for the info
     
    tightR1, Jan 22, 2005
    #4
  5. Racer45

    Racer45 old guy just tryin'

    you can short it out bt making a loop with the wires. It worked fine on my 600RR
     
    Racer45, Jan 22, 2005
    #5

Share This Page