What to use for temporary fuel supply ..for jetting, maybe starting a motor in the shop .etc. if it matters its for a gsxr 600... Over the years , I've made a few out of plastic gas cans and siliconed the fitting in but nothing that has lasted and not leaked after awhile... what do you guys use
I've got a motionpro auxillary fuel IV (as the wife calls it). It works well, but the first time I used it leaked a little bit at the petcock junction. I guess it just needed some fuel to swell the rubber parts because it hasn't leaked since.
find an old lawnmower gas tank. add a piece of fuel hose and a shut off valve and there ya go! I did my aux tank for less than $6. I just find a comfy spot to bungy or rubber band it to and then fire up the bike...
propane.....it burns clean! weadwacker gas tanks, use seal-all on a metal fitting/tube in the tank motion pro aux fuel tank is great (except for $$$) whatever; always use inline filter and keep extinguisher handy
Thanks guys, was looking to do it on the cheap like the weedwacker or lawnmower gas tank. suggestion...
Also, the fuel tanks at your local hobby shop that are designed for large scale R/C aircraft would work quite well.
I used Fiat brake master cyl reserviors. These are remote resv's and have a nipple on the bottom. Only hold about 4oz though. Great for dirt bikes. On the shelf I always had an rear end dope bottle with gas in it. These have a tapered spout with a small cap. Use this to either fill the float bowls or the temp gas container.
Here is what I ended up with. (My buddie told me about this ) Murrays Auto has Radiator overflow reserviour (sp?) holds over a quart has 5/16 fittings on the bottom and the top and a metal cage to hang it from .. $10 bucks .
$14.50 from summit racing. Have not tryed yet not sure if the plastic is fuel proof but being that its used under a car hood I would think that it is.