Ninja 400, RS660, ZX10 parts and more

Time to sell my collection of parts. Had and raced many Ninja 400s the last few years. Also have many brand new parts in boxes that I will be listing on eBay, if you need something please text me.

All parts are located in Tavares FL, parts are available for local pick up, I will ship parts at your expense, and if using PayPal a 3% fee will be added.

Any questions or want photos please text me at 9five2-2five0-59one7

Ninja 400

• Spears exhaust bracket new $40
• Spears clutch pin and bearing new $25
• Spears 415 rear sprockets 47,48,52,54 tooth used $20 each
• DID 415 chain used $25
• FTECU quick shifter $125
• Brembo front rotor used $75
• Cosmetic thin head gasket 71mm bore .018 MLS $25
• Kawasaki OEM clutch plates, 7x2.0mm and 2x1.6mm new $15 each or $50 for all
• OEM Clutch with some fibers new take off $75
• OEM new upper triple $100
• Stator cover used $50
• Wire harness w/ ABS used $40
• Rectifier used $40
• Clutch perch w/lever scraped $25
• Fuel pump new take off, $75
• Radiator used, 2 available $60 each
• Cush drive new take off $50
• OEM rear set plates left and right new $100
• OEM rear set plates left and right used $60
• Rear shock linkage new take off $20
• Swing arm used $100
• Swing arm pivot bolt $10
• Rear brake adapter used $10
• Service manual $20

RS660

• R&G case covers, used some scratches $80
• Robem Engineering kickstand eliminate switch new $5
• Stainless steel braided rear brake line used $25
• Spears Racing fairing stay, no duct, new $50

ZX10RR 2017

• Front tone ring, bought for a 2017, does not fit R models $50
• OEM Brembo M50 front calipers with brake line $200
• Kawasaki kit ECU calibration tool with disc and cables part number 57001-0009 $450

ZX6R 2010

• 51mm renthal clip ons used $60
• Driven 520 steel rear sprocket 41 tooth $20

Misc

• K-tech 2016 R3 front springs 9.0 x2 $25 for the pair
• Motion pro grips $10 per pair
• Spears racing seat foam $10
• Helimot back protector medium $20
• Pit posse tire warmer 180/190 size $50

 

Any chance you have an ABS delete module for the 400?

 

I will take 51mm clip on.

 

Spears clutch pin, 47&48 tooth rear sprockets, FTECU quickshifter, Brembo rotor, 1 radiator, manual and tire warmers SOLD

 

no

 

Zx10 calipers fresh or need rebuild? What type of lines? TRS pins by chance?

 

calipers look good, about 3500 miles, OE lines. I may have TRS pins. Shoot me a text for pictures

 

51 mm clip ons SOLD

 

what have you got left for ninja 400?

 

Are the ktech springs stock replacements, or for their cartridge kit (if different)? Thanks.

 

• Spears exhaust bracket new $40
• Spears 415 rear sprockets 52,54 tooth used $20 each
• DID 415 chain used $25
• Cosmetic thin head gasket 71mm bore .018 MLS $25
• Kawasaki OEM clutch plates, 7x2.0mm and 2x1.6mm new $15 each or $50 for all
• OEM Clutch with some fibers new take off $75
• OEM new upper triple $100
• Stator cover used $50
• Wire harness w/ ABS used $40
• Rectifier used $40
• Clutch perch w/lever scraped $25
• Fuel pump new take off, $75
• Radiator used, $60 each
• Cush drive new take off $50
• OEM rear set plates left and right new $100
• OEM rear set plates left and right used $60
• Rear shock linkage new take off $20
• Swing arm used $100
• Swing arm pivot bolt $10
• Rear brake adapter used $10

 

DM sent