1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2nd Gen sv650 throttle bodies

Discussion in 'Tech' started by jlogalbo, Nov 27, 2020.

  1. jlogalbo

    jlogalbo Well-Known Member

    Have a 2006 sv650 with single plug heads.

    the throttle bodies are bad and causing fueling problems

    does anyone know if there is a difference in the single plug and dual plug throttle bodies ?

    thanks

    joe
     
  2. Waterboy

    Waterboy Rain Man

    Yes, they are very different and from what I remember don't cross between the two motors
     
  3. jlogalbo

    jlogalbo Well-Known Member

    Thanks I have been doing some digging as well and looks like they don’t cross
     
  4. mgiossi

    mgiossi Well-Known Member

    I have a set of throttle bodies for the single plug heads if you are looking for a them
     
  5. TurboBlew

    TurboBlew Registers Abusers

    i read on this tech forum that FCRs are better than FI...lol.
    Whsts wrong with them? The blades?
     
  6. Rico888

    Rico888 Well-Known Member

    Send them to Zoran....he'll fix em right up....:D
     
  7. jlogalbo

    jlogalbo Well-Known Member

    I have tested the injectors as good (used another set same problem ). At this point it is most likely the servo,

    rico- I have started talking with zoran thanks
     
    Dave675 likes this.
  8. Dave675

    Dave675 Well-Known Member

    For Sv’s that is correct.

    Also 1999-02 frames :)
     
    TurboBlew and RRP like this.
  9. regularguy

    regularguy Always Krispy

    I've seen the secondary throttle valve take a dump and not throw a code.
     
    Waterboy likes this.

Share This Page