[This is my 2005 Suzuki SV650 used in the 2020 MotoAmerica Twins Cup season. I still have to race it at Laguna Seca, but after that it will be available for purchase. Engine will have 4 weekends on it. Bored Throttle Bodies (by zoran@twf) Robem Engineering Velocity Stacks 677cc 2mm Wiseco Pistons Zlock A-Beam Connecting Rods Lightened Flywheel (by zoran@TWF) Ported Heads Web camshafts (100/101 grind) M4 Exhaust Penske Triple (by Zoran@TWF - has rash on res from hitting chain at round #1) 2019 GSXR600 Forks with GP 25mm Carts (by Zoran@TWF) TiNtride Coated Tubes (blue) and T3 coated Lugs (bronze/brown) CBR600RR calipers Brembo RCS19 Master OZ Piega Wheels DID ERV3 Chain Renthal Sprockets Renthal Grips Renthal 20degree Clip ons Renthal Clutch Lever Renthal Brake Pads RSV4 Fairing/Tail GB Case Covers Robem Engineering Adjustable Triple Clamps (set to 26mm offset) Robem Engineering Fairing Stay Robem Engineering Subframe Robem Engineering Lever Guard Robem Engineering Rear Caliper Bracket Brembo P34 Rear Caliper MotionPro Revolver Throttle MotionPro Overflow Bottle Woodcraft Rearsets PowerCommanderIII with Quickshifter TWF Battery Box Shorai Battery 707 Aluminum Dog Bones 707 Aluminum Engine Mounts Titanium bolts everywhere Bike weighed 335lbs on MA scales with ~1.5 gal of fuel. Trap speed this weekend at Indy was 136mph vs Landers 135mph (shows how much I suck) Spare set of stock GSXR wheels included. $9,000 obo Either located in Ephrata, PA or maybe stuck in Reno, NV after Laguna. If it makes it back to east coast after Laguna I will completely go through the bike, clean, re-grease, and possibly re-paint it. There is some light damage to right side fairing after a low side at Pittsburgh. I don't have the bike at the moment since it's being transported out to Laguna so here are the most recent photos i have. Here's before season started and before Robem Engineering made me a subframe and fairing stay.
just different bike, 3rd gen SV If this one doesnt sell, it may live out west for the west coast rounds in 2021.
Nice bike and everyone needs to remember to ask about the mid range torque, not the top end HP. I'm not sure what this bike puts out, but it sure squirts off the corners fast!