1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Full Carbon RS250 Cup bike 70whp for sale

Discussion in '2-Stroke Machines' started by mattology, Oct 6, 2020.

  1. mattology

    mattology Well-Known Member

    I am selling my RS250 cup bike that I have been building the last few years.

    It's all done, not incomplete like a lot of the builds out there.

    Rode it up and down the street, dyno tuned it, but I am just going to stay in the direction of riding my 125 and minis.

    Bike starts first kick, runs a dream, I am sick and tired of signing up for track days months in advance only to have the entire weekend rained out. I'm over it, I don't want to crash it, it's more bike than I want or need anymore, and the joy for me was building it.

    [​IMG]
    [​IMG]

    Engine:
    Vertex single ring pistons squish right at 0.8
    Cougar Red billet heads with avgas inserts
    Cougar Red 3pc billet powervalves and billet powervalve pulleys
    Moore Close Ratio Gearset
    Italia Compositi carbon fiber larger volume airbox
    Suzuki race kit air solenoid setup
    Jolly Moto pipes ( ceramic plated )
    Pingel petcock and fuel filter

    Electronics:
    Zeeltronic ignition
    Complete custom wiring harness with Deutsch connectors
    Electronics relocated to behind front fairing

    Front end:
    Melotti Racing upper triple clamp
    Radial front end:
    Ohlins Nix30 cartridges in GSXR-600 forks
    Cerakoted lowers, DLC fork tubes, Kashima coated uppers
    Brembo M4's cut down to fit Brake Tech axis iron 298mm rotors
    Braided lines
    BST front wheel
    Titanium fasteners
    Woodcraft clipons
    Custom spacers and doodads to make it all work out
    Polished frame

    Rear end:
    BST rear wheel
    Ohlins TTXGP YA468
    BrakeTech axis iron rotor
    Braided line
    Gilles rear sets
    T12 Billet Chain Adjusters

    Carbon fiber:
    Wheels
    Airbox
    Self supporting seat - no subframe
    RSW Style / Mk1/2 Hybrid Tank with motorsport cap and breather
    Fairings
    RSW style front and rear fenders
    Assorted composite pieces 3d printed from CF reinforced Nylon and Polycarbonate


    I'm sure I forgot some stuff here and there. Lot of time into her.
     
    SpeedyE, trussdude, NemesisR6 and 6 others like this.
  2. Rene Bucek

    Rene Bucek Well-Known Member

    You may want to add an asking price. Unless I missed it somewhere.
     
  3. Phl218

    Phl218 .

  4. mattology

    mattology Well-Known Member

    It's going to initially go on to RSBFS and BAT at 16.

    Feel free to contact me if you're serious though and we can talk.
     
  5. sharky nrk

    sharky nrk Rubber Side Up

    ..... ummmmm ........... wow

    that is very nice.
     
  6. jcivince

    jcivince Well-Known Member

    Awesome build! Curious if you've had it on a scale?
     
  7. Mjmadd

    Mjmadd Well-Known Member

    beautiful bike! great job. can we talk? contact info? Aprilia fan here. Have a 04 cup in the man cave- to original to really ride. But that...………. Oh yea!
     
  8. mattology

    mattology Well-Known Member

    feel free to PM me for contact info -
     
  9. mattology

    mattology Well-Known Member

    the last time i weighed it with the bathroom scale and the 2x4 method it was like 256
     
    JCW likes this.
  10. Sweatypants

    Sweatypants I am so smart! S-M-R-T... I mean S-M-A-R-T!

    i really want to tell you to shut up and everyone else to go away and mongo to kill this thread so we can all just pretend this isn't happening... [long exhale] BUT... whatever makes you happy man. this bike is so dope, i just wanna see it run free like a majestic stallion.
     
  11. 50Joe

    50Joe Registered User

    NOOOOOOOOOOO! Don't do it Matt. :(

    You all have no idea how much time, effort, research and development Matt has into this build.

    Matt, breathe deep and just stop. Wait until Springtime at least. Trust me on this.
     
    dave3593 likes this.
  12. motion

    motion Nihilistic Member

    SICK build! Sorry to see you selling it.... I can't imagine how many hours you have in that. Good luck!
     
  13. dave3593

    dave3593 What I know about opera I learned from Bugs Bunny

    Don't sell it!!

    You can always sell it later but it is hard to un-sell it once its gone.
     
  14. dave3593

    dave3593 What I know about opera I learned from Bugs Bunny

    Swap out some of the parts you would hate to tear up with cheaper stuff. Put some frame sliders on it and TAKE IT TO THE TRACK.
     
  15. Sweatypants

    Sweatypants I am so smart! S-M-R-T... I mean S-M-A-R-T!

    ORRRRRR... go rip that fucker right now and get a dry clutch conversion for it too! LOL :cool::D
     
  16. mattology

    mattology Well-Known Member

    Bump

    $16000.
     
  17. 50Joe

    50Joe Registered User

    Keeeeep Ittttttttt.
     
    Stumpy and Sweatypants like this.
  18. Ron D

    Ron D Active Member

    DM Sent...
     
  19. mattology

    mattology Well-Known Member

    replied. still available. might take off the market though
     
    50Joe likes this.
  20. motion

    motion Nihilistic Member

    Good decision. 16K is too cheap for that thing. 20 minimum.
     

Share This Page