Need some advice. My stock front caliper bolts heads are starting to round off. Dont know if was me or previous owner. I always use torque wrench. Any aftermarket bolt recommendations or just get another set of OEM bolts? Thanks Dan
Didn't that bike come with allen head bolts on the calipers? If those are the allen wrench type of bolt I would replace them with hex heads. Just wondering....
Stock are allen head. I had the same problem with my 05 750 if I didn't use a good quality, sharp, allen socket. Bad fitting or soft metal sockets will fecker them up for sure. Or you could just switch to a good quality flange-hex head bolt.
09103-10392 2006 12mm hex 09106-10076 -2005 allen https://www.pro-bolt.com/titanium-front-brake-caliper-mount-bolt-kit-parallel-head-4.html