1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

08+ R6 Check eng light on with no code.

Discussion in 'Tech' started by EnvyCycles, Feb 14, 2020.

  1. EnvyCycles

    EnvyCycles D.RoD

    Hey guys, got this 08+ R6 that I had the battery off for a few days while working on it.
    Today I was done and hooked up the battery and started the bike no issues but did notice the eng light on.
    Checked and had 4 stored codes in D62 in DIAG but when I went to D60 there were only 3 codes which were 39, 41 and 46.

    I cleared the codes but in D62 still shows 1 and the light on the cluster is still there and in D60 shows 0.
     
  2. emry

    emry Can you count? 50 Fucking what?

    That's because you still have 1 unfixed problem. Look at the LCD with just the key on.
     
  3. EnvyCycles

    EnvyCycles D.RoD

    emry, there was nothing. However I decided to start checking all relays and swapping with known good and the person that owned the bike had ad exup eliminator and I removed it and installed a resistor and problem went away. Weird that on the dash or in the DIAG there was no code. Im assuming that the eliminator was giving some weird info to the ECU.
     

Share This Page