1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

07-12 CBR600RR Racebike Part Out

Discussion in 'Parts for Sale' started by bodhi, Apr 17, 2019.

  1. bodhi

    bodhi titanium clavicles

    Hey all,
    I started selling my 07 CBR600RR racebike parts late last summer, and sold about half of it. Now that Spring is here, and I can actually get in my garage, I’m starting up the parts sale again for the rest of it.
    PM me up if anything here is of interest. Prices are the part, shipping is additional.

    I made an album with all the part pics, so you can browse them.
    I can also take more pics if something isn't showing up.
    https://beta.photobucket.com/u/fractal2k5/a/67bbccd4-de8e-4852-81da-e3d331efa7f8
    https://beta.photobucket.com/u/fractal2k5/a/7451adf7-468a-4f08-bc11-bc4c44942067

    Cheers,
    Darrel Cherry
    Former Utah MoM #18


    ($750) Ohlins TTX rear shock

    ($250) GPR Steering Stabilizer

    ($250) Dynojet Ignition Module and Quickshifter (Push type) combo. $200/$100 separate.

    ($150) Accossato 19x18 Master Cylinder (like new)

    ($180) Woodcraft rearsets - Notice the pegs are cut down. I did this from the recommendation of a fellow racer, and it is way better than the stock length IMO. If you don’t like it you can always get new pegs to put back on.

    ($25) Stock Front Calipers, each

    ($120, $50) Woodcraft Engine covers - Small one has rash, but fully functional

    ($50) SPARE Vortex clip-ons - bar ends rashed

    ($25) Woodcraft frame sliders (some rash, but basically full height)

    ($10) Woodcraft Shark Fin (just the fin, no mounting hardware)

    ($120) SPARE Sato Racing Rearsets (can be used for standard or GP shift with the push quickshifter. Standard required the use of an extra pivot piece and 2 rods in the system)

    ($50 all) SPARE Multiple rear sprockets of different sizes (39, 41, 42, 42, 44 / 15 front)

    ($20) Front Sprocket Cover

    ($40) Stock ECU

    ($40) Modified wiring harness. This has been spliced and set up for various electronic mods

    ($25 ea) 2 rear cush drive

    ($100) Headlift Stand - not sure brand - Vortex?

    ($100) Gauge Cluster - one broken post. Still works great.

    ($90) 8 cell EV02 Ballistic Battery plus quick-connector. Used once.

    ($75) Radiator - good condition, works great, some dings/dents

    ($40) Gas Tank with pump, no cap - sold separately - tank has some dents and rash but works fine

    ($15) swingarm stand spools

    ($20) Stock seat, one tab slightly broken, still works prefect

    ($20) Starter/Kill Switch - wired as the keyed ignition module (turn on, turns bike on) some rash on top

    ($50) stock plastic upper - Gauge/mirrors

    ($50) Ram air duct

    ($80) Stock Triple Clamps - free GoPro connector included!

    ($20) Front Fender - Armor Bodies

    ($40) Sharkskins Tank Cover

    ($40) Tank Cover w/ Stomp Grips - Armor Bodies, has rash on the left side (see pictures)

    ($40) Rear master cylinder and calipers set

    ($40) Stock rear shock

    ($30) Misc nuts and bolts from teardown
     
    Ethan Wakefield likes this.
  2. bodhi

    bodhi titanium clavicles

    Accossato 19x18 Master Cylinder SOLD
     
  3. bodhi

    bodhi titanium clavicles

    Had a few questions, so I thought I'd post: The Ohlins TTX is set up for 175# rider.
     
  4. WingLeaner

    WingLeaner The Medium Labowski

    Wheels available?
     
  5. bodhi

    bodhi titanium clavicles

    sorry, wheels are sold
     
  6. Marc A.

    Marc A. Well-Known Member

    Radiator guard?


    Sent from my iPhone using Tapatalk
     
  7. bodhi

    bodhi titanium clavicles

    no radiator guard. Just the radiator.
     
  8. bodhi

    bodhi titanium clavicles

    Ignition and QS sold.
     
  9. bodhi

    bodhi titanium clavicles

    Ignition and QS back for sale again. For anyone looking, the Ignition is a Power Comander III unit, not a V.
     
  10. erick1670

    erick1670 Chapin

    PM sent for the Sato rearsets...
     
  11. bodhi

    bodhi titanium clavicles

    Just sold the Sato rearsets, sorry bud.
     
  12. nikos

    nikos Well-Known Member

    Quickshifter still available?

    Sent from my MI MAX 2 using Tapatalk
     
  13. bodhi

    bodhi titanium clavicles

    Yessir, it is.
     
  14. Mike:p

    Mike:p Well-Known Member

    Pm sent about the Woodcarft parts
     
  15. Angel Frakov

    Angel Frakov Well-Known Member

    Gpr available?
     
  16. Night_King

    Night_King Well-Known Member

    Are you selling the front forks?
     
  17. bodhi

    bodhi titanium clavicles

    The forks sold. Rear shock still available tho.
     
    Night_King likes this.
  18. mgiossi

    mgiossi Well-Known Member

    Do you still have the right side stock caliper?
     
  19. Night_King

    Night_King Well-Known Member

    How about clip-ons?
     
  20. Christian Bigsoldier

    Christian Bigsoldier Active Member

    The rear shock still available?

    Sent from my moto z3 using Tapatalk
     

Share This Page