1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Brake or clutch master cylinder for a one inch bar.

Discussion in 'Tech' started by hcr25, Jan 10, 2019.

  1. hcr25

    hcr25 Well-Known Member

    1E4D7C38-5FCE-4F1D-8796-C6AA402EBC9A.jpeg Do any motorcycles have a one inch handle bar? I have some Discacciati brake/clutch Master cylinders that are made for one inch bars. They are billet and I believe the are 19X18 but not positive. I at one time had spacers that enabled them to be used on 7/8 Sportbike clip-on bars.
    No idea where to get more made though.

    Trying to find a use for these, thanks in advance.
     
  2. beathiswon

    beathiswon Well-Known Member

    hcr25 likes this.
  3. Pneumatico Delle Vittorie

    Pneumatico Delle Vittorie Retired "Tire" Guy

    Harleys use 1 inch
     
    K51000 likes this.
  4. hcr25

    hcr25 Well-Known Member

  5. Britt

    Britt Well-Known Member

    Define "Cheap Enough".... looks kinda cool to me
     
  6. hcr25

    hcr25 Well-Known Member

    Like $65 shipped.
     
    TurboBlew and Britt like this.
  7. TurboBlew

    TurboBlew Registers Abusers

    what sized banjo?
     
  8. Banditracer

    Banditracer Dogs - because people suck

    Almost all the Jap cruisers are 1 inch bars.
     
  9. hcr25

    hcr25 Well-Known Member

    I’ll try and find out today.
     
  10. If they are 10mm banjo I’ll take one off your hands, it may work for a project I have.
     
  11. KneeDragger_c69

    KneeDragger_c69 Well-Known Member

    Might be interested as Bacon mentionned for the 10mm thread.
    Being a machinist, it'll be a breeze to do the sleeve ;)
     
  12. hcr25

    hcr25 Well-Known Member

    I’ll find out today for sure and post better pictures.
     
  13. I actually have a few but won’t be using them. Going to use this to possibly replace the master on my dirt bike left hand rear brake (custom system I made, hand and foot brake, makes right hand turns much easier when you have a fake right hip with impeded movement).
     
  14. KneeDragger_c69

    KneeDragger_c69 Well-Known Member

    Ishhh...:eek: Not my business but how and why ??
     
  15. Crashed, misty street, young and stupid. Then when it was mended destroyed it further in hockey. It’s the reason I have a Larry Pegram style of riding.
     
  16. KneeDragger_c69

    KneeDragger_c69 Well-Known Member

    Dang... sorry to hear that but nice to see you're still riding ;)
     
  17. hcr25

    hcr25 Well-Known Member

    Sorry for the delay. They are 10X1 same as Brembo masters.
    These are also reversible by switching the bleeder valve from on side to the other.
     

    Attached Files:

  18. Ill take one off your hands. Two if the other guys don’t want any. I actually need a master for my new, designed by me, disc brake set up for my golf cart. Drum brakes don’t work too well on a fast cart.
     
  19. hcr25

    hcr25 Well-Known Member

    I have at least 10 of these so if you want more than one no problem.
     
  20. KneeDragger_c69

    KneeDragger_c69 Well-Known Member

    I'll try out one... hoping it's a 19mm and not smaller (seems to be set-up for the clutch side and those usually are 16mm)

    Can you validate if it's 19mm plz ?

    Thnx
     

Share This Page