1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

looking for good tech videos

Discussion in 'Tech' started by ajcjr, Dec 30, 2017.

  1. ajcjr

    ajcjr Well-Known Member

    I have worked on some dirt bikes here and there, as well as cars. I have the user manuals but was looking for some good videos on when to adjust chains, bleeding motorcycle brakes etc.. Anyone have any good books or vids to share please let me know.

    how often are you cleaning calipers etc..
     
    Last edited: Dec 30, 2017
  2. TurboBlew

    TurboBlew Registers Abusers

    nomar used to have some good videos on tire removal with a manual machine.

    chain adjustment will vary as theres a few different types of adjusters. Best tool for that is
    a couple of rods, long rubber bands, and a tape measure. Put the rods through the swingarm axle and rear axle,
    attach bands and measure. Works on most modern bikes. Exceptions would be single sided swingarms or bikes with solid axles. (SV, 250s, etc)
     
  3. Ra.Ge. Raptor

    Ra.Ge. Raptor wanna_be_fast

    The "rod through axle" method doesn't work on all bikes with hollow axles. the hole diameter is different on each side.
     
  4. metricdevilmoto

    metricdevilmoto Just forking around

    Centering cone.
     
  5. TurboBlew

    TurboBlew Registers Abusers

    ajcjr likes this.
  6. RM Racing

    RM Racing Tool user

    If you have a set of these:

    [​IMG]

    Then it doesn't matter.
     
  7. Ra.Ge. Raptor

    Ra.Ge. Raptor wanna_be_fast

    Exactly. That's where "a couple of rods, long rubber bands and a tape measure" don't do the job.
     
  8. blake holt

    blake holt Well-Known Member

    You sell these?
     
  9. RM Racing

    RM Racing Tool user

    Yes.
     
  10. blake holt

    blake holt Well-Known Member

    Well how long you going to make me wait for a price?
     
    Mran556 likes this.
  11. emry

    emry Can you count? 50 Fucking what?

    The Partzilla guys have a ton of content on YouTube.
     
  12. Brian Riemland

    Brian Riemland Active Member

    Same with STG (basic stuff anyway)
     
  13. Ra.Ge. Raptor

    Ra.Ge. Raptor wanna_be_fast

  14. RM Racing

    RM Racing Tool user

    I'm not making you wait. Normally, if people are interested, they send me a note. It's been published in the rules of this forum that selling items should be in the classified section, so I try not to break those rules.

    Send me a PM here and I'll send you details.
     
  15. blake holt

    blake holt Well-Known Member


    Pm'd
     

Share This Page