Parting my 09 R1 Build. Most parts will work for 09-14. Located in San Diego, CA. All Prices include SHIPPING & INSURANCE in the US. Local pickup is welcome, I'll even knock off some $ if you wanna meetup locally. Pix: https://imgur.com/a/4OdZj I'll do my best to check the forum but email is the best way to reach me : hernzzz (AT) gmail (DOT) com. Ohlins TTX Shock. 3 days since refresh. setup for 210-230lb rider. ($900 Shipped) Ohlins 30MM Cartridges installed in OEM Forks. 3 days since refresh. setup for 210-230lb rider. ($900 Shipped) Catalyst Racing Composite Bodywork. Supersport Set (uses OEM Seat). Upper, Windscreen, Lower, Tail, Fender. Sprayed w/ ColorRite to match OEM Blue. Nice Clear Coat. Typical chips up front. ($450 Shipped) Graves FULL Stainless Exhaust + Brackets. Light Cosmetic Scrapes from getting low. Works Great! ($800 shipped) WPS FeatherWeight Lithium Battery. LIGHT! LED light shows charge level. ($100 Shipped) Marchesini Front Wheel + Braking Rotors. Includes wheel spacers. Takes 120/70/17 Tires. Typical chips from frequent tire swaps. ($850 Shipped) I'll update post when other parts come off bike - DynoJet PCV, DynoJet Quickshifter, Attack Performance Flashed ECU, Woodcraft Rearsets. Thanks for looking!!!
Yes all parts removed from an 09. Most everything should work with all bikes up to the '14 except the electronics - power commander v , etc.
I know. I was asking because of the ECU. PCV will work with 09-14. The only difference is the fuel map.
The on 2 thing you have listed that will not work with the 12-14 is the ECU and the front forks. If the fork has the mount for the TC sensor, then it will work for the 12-14.
***Added PCV + QuickShifter Setup & Woodcraft Rearsets*** Hey guys, I'm parting out a 2009 R1 Build. Lot's of great parts that will fit your 09-14 R1's. Prices posted are SHIPPED & INSURED within the USA. You are welcome to meetup locally to pickup parts. I will knock off some $ if you pickup in person. I'll check the post often but email is the best way to reach me = hernzzz (AT) gmail (DOT) com. I will post thumbnails below. See Full Album Here: https://imgur.com/a/h3bub Dynojet Power Commander V + Dynojet Quick Shifter Module + Dynojet PULL QS Sensor. ALL for ($350 Shipped) Woodcraft Rearsets. Includes Spacers, Brake Pedal, Shift Pedal, Spacers, Shift Rod. Use your OEM Knuckle ($275 shipped) Graves FULL Stainless Exhaust w/ Carbon Pipe. Mounting Brackets included. Tiny cosmetic scrapes on the can from getting low. Works Great. ($800 Shipped) WPS Featherweight Lithium Battery. Super light. Works great and has a test button to see charge level. ($100 Shipped) Marchesini Front Wheel + Braking Rotors. Includes proper Spacers. Stock Caliper Spacing. Fits 120/70/17 Tires perfectly. Has typical cosmetics from frequent tire swaps. Straight, Works Great, Looks menacing and adds great stopping power! ($850 Shipped).
Here's what I have left: -Dynojet Power Commander V + Dynojet Quick Shifter Module + Dynojet PULL QS Sensor. ALL for ($350 Shipped) -Woodcraft Rearsets. ($275 shipped) -Graves FULL Stainless Exhaust w/ Carbon Pipe. ($800 Shipped) -WPS Featherweight Lithium Battery. ($100 Shipped) -Marchesini Front Wheel + Braking Rotors. ($850 Shipped).
Graves Pipe, Woodcraft Rearsets are sold Here's what I have left: -Dynojet Power Commander V + Dynojet Quick Shifter Module + Dynojet PULL QS Sensor. ALL for ($350 Shipped) -WPS Featherweight Lithium Battery. ($100 Shipped) -Marchesini Front Wheel + Braking Rotors. ($850 Shipped).
***UPDATED POST*** Hey guys, I'm parting out a 2009 R1 Build. Lot's of great parts that will fit your 09-14 R1's. Prices posted are SHIPPED & INSURED within the USA. You are welcome to meetup locally to pickup parts. I will knock off some $ if you pickup in person. I'll check the post often but email is the best way to reach me = hernzzz (AT) gmail (DOT) com. I will post thumbnails below. See Full Album Here: https://imgur.com/a/h3bub R&R Racing Race Subframe - Trade for your stock Subframe + $50 R&R Racing Race Fairing Stay - Trade for your stock Stay + $50 Dynojet Power Commander V + Dynojet Quick Shifter Module + Dynojet PULL QS Sensor. ALL for ($350 Shipped) WPS Featherweight Lithium Battery. Super light. Works great and has a test button to see charge level. ($100 Shipped) Marchesini Front Wheel + Braking Rotors. Includes proper Spacers. Stock Caliper Spacing. Fits 120/70/17 Tires perfectly. Has typical cosmetics from frequent tire swaps. Straight, Works Great, Looks menacing and adds great stopping power! ($850 Shipped).
Here's what's left: *Marchesini + Braking Rotors *R&R Fairing Stay *Dynojet Quickshifter Module + Quickshifter PULL Sensor
Interested in the quickshifter and pull sensor. Is the quickshifter labelled QEM 15? I'm looking to use it on an R6 and supposedly it's the same part number. How much shipped to 01020? Thanks.
Here is what's left. Woodcraft Keyless Ignition Harness - $40 shipped R&R Racing Race Fairing Stay - $60 shipped Dynojet Quick Shifter Module + Dynojet PULL QS Sensor - $200 shipped
Does the "Dynojet Quick Shifter Module + Dynojet PULL QS Sensor - $200 shipped" come with the shift rod and everythings it needs to work on the bike?