1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wired brake caliper pins for CBR600RR

Discussion in 'Information For New Racers' started by Mayhem220, Apr 14, 2017.

  1. Mayhem220

    Mayhem220 Well-Known Member

    I have a 2007 Honda CBR600RR. I noticed in the rule book that the brake caliper pins must also be wired in addition to the brake caliper bolts. On my bike they are recessed. What is the best way to wire and drill them?
    Or where can i get replacements that are pre drilled?
     
    Mayhem220, Apr 14, 2017
    #1
  2. Mongo

    Mongo Administrator

    Doesn't say they have to be wired - says they have to be secured in a visible manner. Silicone works for that too. If you can get longer ones that are drilled small r-clips (used to come on them all stock) are legal too.
     
    Mongo, Apr 14, 2017
    #2
  3. bigkaley

    bigkaley Well-Known Member

    bigkaley, Apr 14, 2017
    #3
  4. JBall

    JBall REALLY senior member

    Grind a small flat spot on the middle of the pin to make a place to start a safety wire hole. Drill with a 1/16" bit and wire to a covenient location.
     
    JBall, Apr 14, 2017
    #4
  5. Mayhem220

    Mayhem220 Well-Known Member

    Thank you, for the clarification and the site info.
     
    Mayhem220, Apr 14, 2017
    #5
  6. Mongo

    Mongo Administrator

    Lots of ways to skin this particular cat :D
     
    Mongo, Apr 14, 2017
    #6
  7. stangmx13

    stangmx13 Well-Known Member

    those caliper pins were easy to wire. i drilled through the caliper body and through the head of the pin, then wired them together.
     
    stangmx13, Apr 14, 2017
    #7

Share This Page