Irnieracing 2016 S1000RR Track Bike EMRYS (Tested and Tuned Ready For-Sale)

Irnieracing 2016 S1000RR named Emrys is For Sale.



2016 S1000RR "Emrys" bike build series.
https://www.youtube.com/playlist?lis...qsoH97GFapRvUE

Irnieracing Garage Video - Meet Emrys: https://www.facebook.com/WBMotors/vi...4607867584353/

Irnieracing Garage Video - Friday Night Live: https://www.facebook.com/irnieracing...54766605038273

2016 S1000RR Racebike with 1265 miles on entire bike. I built two bikes identical, but didn't end up racing the Nationals, so the bike was never used. All the miles are from test and tuning the machine. It's a perfect bike, like new condition, but better if your interested in a professionally built track bike.

HP Power - ECU upgrade
RCK3 - ECU upgrade
- Fuel and ignition tuned at 2Wheel DynoWorks on 92 pump gas (Map Switch 1) / Sunoco RMR race fuel. (Map Switch 2).
Dynojet - Power Commander V with left handlebar mounted map switch.
- fuel further tuned, + throttle transition smoothing.
RCK3 - fine tuned on tracks by Marcel Irnie - test and tuned
- Engine braking - gear specific
- ABS - British Superbike Map 1 + 2
- DTC - Maps for both Pirelli & Dunlop Slicks
- launch control
- wheelie control
- throttle adaptation with quick-turn throttle value.
- pit limiter

DYNOTUNE: See for yourself what goes into the dyno tune process.

Exhaust:
Hindle Full Exhaust - Titanium Evo model

Brakes:
Brembo 19RCS Master Cylinder with Brembo Remote Adjuster
EBC GPFAX 604 - brand new front brake pads installed for sale.
EBC Rear Pads 'v' cut for quick tire changes

Suspension: Tested and tuned. Bike comes with life-time setup support by Marcel Irnie.
GP 25mm Fork Cartridge Kit with 1.05 Springs
Nitron Racing Rear Shock - Pro Model with optional Hydraulic Preload. 550lb/in rear spring currently installed. Optional 525, 575 & 600 lb/in springs available.

Subframe / Fairing stay:
Tightails Aluminum Subframe
Tightails Aluminum Fairing-Stay

Steering Stabilizer:
Ohlins Steering Stabilizer

Wheels:
BMW HP forged wheels with 90' valve stems, Brembo OEM front Rotors, and MMR lightweight rear rotor.

Drive:
RK 520 ERV3 Racing Chain
Custom lightweight Aluminum 7075 CNC Rear sprockets with black hard coat anodize: 41, 42, 43, 44, 45
Custom lightweight Hardened Steel CNC Front sprocket 15 / 16 (50% lighter then brands sold)

Protection:
Woodcraft Stator Cover
Woodcraft Crank Cover
Woodcraft Frame Sliders
GBracing transmission casw cover
Armour Bodies - 2016 Race Bodywork - custom painted Black with white fins.
RadGuard Australia - Radiator / oil cooler aluminum guards.
RadGuard Australia - Brake / Clutch Lever Guards

Other Parts:
Samco Silicone Radiator Hoses with stainless steel hose clamps.
GBRacing rear-stand Spools
Yoyodyne Chain Adjusters with GP Spool pickups.
Accosato Quick-Release, lightweight gas cap.

Controls:
Woodcraft Clip-ons
Woodcraft Rear-sets
BMW HP Clutch Lever
Brembo 19RCS Master Cylinder with Brembo Remote Adjuster
Stomp Grip - tank sides, top, front.

Seat:
Custom Supersport seat by Apex Stitching.

Pro-Bolts:
-Aluminum Pro-Bolts replacing OEM steel bolts, steel lock-nuts, etc, including airbox, bodywork, windscreen, plastic hardware, battery box, etc. (every bolt installed with blue lock-tight or copper anti-seize.
-Race-spec - titanium front caliper bolts, titanium rear axle nut.
-Race-spec Oil Drain Plug, with large magnet
- custom safety wire clips for ease of use on front calipers, oil fill, oil drain, radiator cap.

Battery:
Shorai Lithium Lightweight battery with Shorai Battery Charger, and quick-connect cable.

OEM Parts Removal for weight reduction:
- air pump, air re-circulation system
- Custom CNC Block-off Plates installed on Valve Cover, and Airbox inlet.
- original bodywork mounts, fasteners,
- exhaust servo unit.
- plastic dividers
- ventilation - emission systems idle
- idle control system/PCV system

I'm probably forgetting a few things, but this list should get you started. What's worth mentioning is the attention to detail with my bike builds. I am not a shop throwing things together with no after thought. Everything is perfectly setup, suspension, engine, computer controls, rider controls, layout, etc. This bike is better then a new bike if you plan to hit the track or go racing. The 1265 miles I put on the bike was all for track setup. My BMW track experience goes a long way towards achieving a desirable race bike, ready for any individual.

The bike is located in Kelowna BC currently, but I can bring South to meet a buyer in Washington. I can also bring to California in March 2017.

$38,000 USD. obo


Cheers
Marcel Irnie
250.869.2515
[email protected]


Nitron Racing Shock, with optional Hydraulic preload adjuster. Pro- Model.





Brand new Hindle Evo installed before sale


New EBC GPFAX604 pads installed to compliment sale.


This is not a used racebike. The bike was built but never used. Only tested and tuned.



This is Merlin (the 2016 S1000RR I race and use for Rider Training.) Emrys is in the trailer and was put on display during my Rider Training California Tour.

Contact [email protected] / 250.869.2515 to inquire.

 

Wow!

 

Only $38,000?

 

Aren't they like $18K? So, $20K of extras?

 

$18k for sucka's only, half that if you're on the Beemer racer program.

 

Well... He did V cut the rear pads guys, gotta be worth something.

 

Could be a Canadian dollar :-D

 

when I saw the price, I thought could be Cdn, be it says USD.

 

Works out to $51,000CAD

 

Where do I sign?!?!?

 

That's the interbank rate. typical rate would get you $52,386.30. I know its poor taste to sh*t on someone else's add, but the price seems a bit steep. $18,200 is Cdn MSRP. So $34K in extras?

 

He will learn about racebike depreciation, soon enough.

 

This is obviously a mistake and the price should read 18,000 USD obo?

 

Is the price for both bikes?

 

I'm sure this guy will appreciate all of you putting in your two sense and keeping his ad at the top.

The bike is very nice, but I do not understand the asking price. I cant even get my 2015 S1k sold for 14k with just about everything.

 

Have you considered adding lifetime setup advice?

 

Are you interested in his bike or just pissing on his for sale thread?

Sweet bike! GLWS

 

Id pay 18 max

 

Are you actually looking to buy a bike? Or are you just here to troll?

Ive seen you shitting on about 4 different for sale ads. Hell, this ad is from 2 years ago and you bumped it just to shit on it.

 

im in the classifieds cause im actually in the market and im closing in on a 2011 s1k thats heavily moded that was raced in the ama
and im looking at other less extreme options aswell also was looking into febur and their radiotors and tanks cause the one im likely to end up w has a febur radiator already on it.. and I trolled this dudes shit cause he's willing' for 29k and ill call him on his bs...but I would pay 18 max for this thats a true statement ..