1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2008 GSXR 600 race bike part out

Discussion in 'Parts for Sale' started by dahustler71, Aug 17, 2016.

  1. dahustler71

    dahustler71 Well-Known Member

    [​IMG]
    I am parting out my race bike. Here is what is available if no price is listed make me an offer. Bike is pictured. I will take pictures of individual parts as requested.

    Forks- Racetech 20mm cartridges with fork extenders. 1 weekend on since last serviced by TSE 180 lb rider- $1000

    Racetech G3-S shock 4 weekends since last service by TSE 180lb rider- $550

    Hyperpro steering damper-$150

    Upper fairing bracket stock-$60

    Speedo-$125

    Clutch lever perch and cable

    Front Brake Calipers, Stainless lines, stock master and SBS dual carbon pads assembly-$125

    Throttle bodies-$100

    Motion Pro throttle kit-$100

    Voltage Regulator

    Airbox with K&N filter -$75

    Swingarm-$75

    PC5-$250

    Quick shifter pull sensor- $150

    Qem module-$80

    Autotune -$225

    Vortex Rearsets-$250

    Rear brake master stock line and caliper with pads -$50

    Motobrackets subframe-$100

    Wheels with rotors-$400

    Wire harness

    Stock ECU

    Start button assembly

    Healtech XTRE box (fits most Suzukis I think)-$100

    Hotbodies painted body work upper, lower, superbike tail not crashed on-$350

    Armour bodies bodywork painted upper and lower crashed but repairable-$75

    Armour bodies painted race tail mint -$100

    Exhaust Yoshimura header with two brothers shorty muffler works and looks good-$325

    Gas tank with fuel pump dented but hold fuel red/white-$200

    Stock head good condition-$200

    M4 Suzuki prepped supersport head with yosh cam sprockets nice-$400

    Radiator, fan, overflow assm $100

    Vortex gas cap$50

    Ram air ducts $60

    Front seat $45
     
  2. Newyork

    Newyork Dip Mode

    If the hyper pro damper will fit an 07 I'll take it.

    I looked into it, it doesn't look like it will bc the part numbers are different. However, I'm hoping you know something I don't....
     
    Last edited: Aug 18, 2016
  3. 280SQUAGGLER

    280SQUAGGLER Well-Known Member

    Is the Armour bodies tail for a $100 use stock seat or foam
     
  4. dahustler71

    dahustler71 Well-Known Member

    Stock seat
     
  5. neckbrace

    neckbrace Well-Known Member

    I'm looking for a front wheel with rotors if you're willing to break up the set.
     
  6. dahustler71

    dahustler71 Well-Known Member

    Yes I will break them up.
     
  7. Andres aguirre

    Andres aguirre Well-Known Member

    Pics on the air ducts?

    Sent from my SM-G900P using Tapatalk
     
  8. phkz24

    phkz24 Member

    I'm interested in the wheel set. I think the 08s fit 07s as well, maybe you could confirm? I'd like some pictures of the wheels and of any damage. These would be my track day set too, just wanna be sure I don't need the get them straightened right away.

    Also possibly interested in the radiator if OEM

    I'm in the NW burbs of Chicago, so maybe we could even do local pick up?
     
  9. Will9465

    Will9465 Well-Known Member

    I use the same toolbox. Small but holds the necessities.
     
    dahustler71 likes this.
  10. neckbrace

    neckbrace Well-Known Member

    How much for the front?
     
  11. dahustler71

    dahustler71 Well-Known Member

    [​IMG][​IMG][​IMG][​IMG]
    All the wheels and rotors are straight. One of the fronts is from an 08 1000 but works fine on the 600. The other is an 08 600. The rotors are all free floating and spin for days when mounted properly. The black rear is from the 08 600 as well. The blue one is an 08 600 but has ceramic bearings and is a higher price. But it spins really good.
     
  12. dahustler71

    dahustler71 Well-Known Member

    $200 plus shipping
     
  13. dahustler71

    dahustler71 Well-Known Member

    [​IMG][​IMG][​IMG]
     
  14. dahustler71

    dahustler71 Well-Known Member

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
    Last edited: Aug 23, 2016
  15. Dirty Dave

    Dirty Dave Well-Known Member

    Pm' sent about speedo.
     
  16. Dcneal960

    Dcneal960 Well-Known Member

    Can u send me pics of the armour bodies bodywork
     
  17. dahustler71

    dahustler71 Well-Known Member

    Armour bodies upper and lower crashed $75[​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
  18. dahustler71

    dahustler71 Well-Known Member

    [​IMG]
    Exhaust plus all screws and springs $325
     
  19. dahustler71

    dahustler71 Well-Known Member

     
  20. dahustler71

    dahustler71 Well-Known Member

    I am parting out my 2008 GSXR 600. Many parts will fit 2006-2010 model Suzukis. Some parts may fit other models as well. Please research that yourself. Prices are listed without shipping included. Please PM me if interested. If a price isnt listed make a fair offer or we can discuss. As of now this was a complete racebike so if something isnt listed that you need please ask, i may have just missed putting it on the list. Thanks in advance!

    Updated list with lowered prices!!!!!


    Forks- Racetech 20mm cartridges with fork extenders. 1 weekend on since last serviced by TSE sprung for 180 lb rider extra springs included- $850

    Racetech G3-S shock 4 weekends since last service by TSE 180lb rider- $400
    Hyperpro steering damper-$125
    Upper fairing bracket stock-$50
    Speedo-$125 -- SOLD
    Clutch lever perch and cable-35
    Front Brake Calipers, Stainless lines, stock master and SBS dual carbon pads assembly-$100
    Throttle bodies-$75
    Motion Pro throttle kit-$90
    Voltage Regulator-$50
    Airbox with K&N filter -$75
    Swingarm-$75
    PC5-$200
    Quick shifter pull sensor- $150
    Qem module-$80
    Autotune -$185
    Vortex Rearsets-$200
    Rear brake master stock line and caliper with pads -$50
    Motobrackets subframe-$100
    Front wheel black with rotors 06/07-$185
    Rear wheel blue with ceramic bearings and rotor-$250
    Wire harness-$50
    Stock ECU-$75
    Start button assembly-$50
    Healtech XTRE box (fits most Suzukis I think)-$100
    Hotbodies painted body work (premium quality paint job) upper, lower, superbike tail not crashed on-$350
    Armour bodies bodywork painted upper and lower crashed but repairable-$75
    Armour bodies painted race tail mint -$100
    Exhaust Yoshimura header with two brothers shorty muffler works and looks good-$325
    Gas tank with fuel pump dented but hold fuel red/white-$200
    Stock head good condition-$200
    M4 Suzuki prepped supersport head with yosh cam sprockets nice-$400
    Radiator, fan, overflow assm $100 --SOLD
    Vortex gas cap$45
    Ram air ducts $50
    Front seat $45
     

Share This Page