1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anyone selling a crf150r or85 cc motard

Discussion in 'Mini Racing' started by dsjr, Aug 10, 2016.

  1. dsjr

    dsjr Well-Known Member

    I'd be really interested in buying a crf150r motard or a 85 cc motard in good condition .
     
  2. TT2013

    TT2013 Well-Known Member

    Where are you located?
     
  3. TT2013

    TT2013 Well-Known Member

    2005 cr85rb. Supermoto/Mini Road Race

    2nd place in AMA Supermoto 2015 Tuscon

    all paperwork/pink slip

    17" excel wheels w/new extra set of tires (dot race slicks)

    Suspension: all gold valves( racetech) f/r and re sprung for 175lb rider, custom shim stacks.

    Freshly build bottom end using only OEM parts, New crank and bearings, cylinder and piston 5 hours ago.. Only AMA Tucson race on engine

    Eric Gorr ported cylinder and head, (Message for more info)

    Vforce reeds

    Galfer 260mm front rotor

    Applied racing crf450r caliper adaptor

    Crf450 caliper and master cyl.

    New chain and sprockets

    Pro taper bars

    Fmf exhaust

    Stock expansion chamber no dents

    Second set of all black plastics

    OEM Honda complete clutch kit unused

    Some extras as well

    Runs amazing ready to race.
     
  4. dsjr

    dsjr Well-Known Member

    I'm in the philly area
     
  5. dsjr

    dsjr Well-Known Member

    Im in bucks county about 10 miles for north east philly
     
  6. TT2013

    TT2013 Well-Known Member

    Located in Southern California. Are you looking for someone local?
     
  7. dsjr

    dsjr Well-Known Member

    That's to far
     
  8. wrichards

    wrichards Active Member

    I am located in NC. I can bring the bike to VIR.

    I have a 2006 CR85RB. It is all stock motor pipe suspension but I do have wheels and tires.

    Wheels are stock hub, Buchanan spokes excel rims with Sava super soft tires used for 1/2 day.

    Comes with dirt wheel and tires as well. $1500 Let me know if you are interested
     
  9. dsjr

    dsjr Well-Known Member

    No but thanks anyway.
     
  10. triplestrong

    triplestrong Well-Known Member

    My buddy is selling a very well sorted 2006 CRF150F. He's in Easton, PA. Alloy wheels, built motor (very strong), full suspension, all the bits...PM me if interested and I'll put you in touch with him.
     
  11. baconologist

    baconologist Well-Known Member

    My YZ85sm is a few posts down
     
  12. Boman Forklift

    Boman Forklift Well-Known Member

    DSJR. There are a few teams here in S. Cal that will be going to Jersey and may have room for a fee. Also I've shipped bikes accross the country many times with uship. I would expect that to cost $4-500.
     
  13. dsjr

    dsjr Well-Known Member

    Thank for the info
     
  14. Boman Forklift

    Boman Forklift Well-Known Member

    If you are interested, I know some guys on a couple of teams and would be happy to ask for you.
     
  15. dsjr

    dsjr Well-Known Member

    I appreciate the offer, but that's okay.
     
  16. IronCactus

    IronCactus Well-Known Member

    I have a 2015 CRF 150R Expert that I bought new in December thinking I would do MiniGP with it. Has maybe 1.5 total hours on it. None of those on the track. Only mods are Rentahal adult bars, Renthal full waffles, expensive kickstand, and professional jetting done by same dealer it was purchased. Have MSO and all other paperwork. Asking $4300 or trade for 2008+ 600cc ONLY trackbike +/- cash as necessary. Located in Stirling NJ.
    [​IMG]
     
  17. swampape

    swampape Well-Known Member

    I am confused by this post - you say you want a 150 or 85, have MULTIPLE offers but have said no...

    It would help your cause if you clarified what bike you want and where you're hoping to find it.
     
    ChouDawg, JTRC51 and Will9465 like this.
  18. JTRC51

    JTRC51 El Speedy Gonzalez

    [​IMG]
     
    ChouDawg and swampape like this.
  19. swampape

    swampape Well-Known Member

    LOL yea sounds about right...
     

Share This Page