1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2007+ CBR600RR Race Parts/Track Bikes part out

Discussion in 'Parts for Sale' started by NickyZ, Jul 5, 2016.

  1. NickyZ

    NickyZ Well-Known Member

    selling one 2007 and one 2008 CBR600RR track bikes, but parting out many of the aftermarket race parts:

    (2) Ohlins rear TTX Shocks; set for 180lb riders; spare spring available

    (1) set of Ohlins 20mm front forks - can disassemble and just send the kit; or swap with a set of stock forks from your bike

    (1) complete set of EBC race pads

    (5) CRG adjustable levers; brake and clutch (the remote adjustable lever in the photo is for an 06 or below 600rr - also for sale)

    (1) spare tank with fuel pump

    (1) complete front master cylinder, unused

    (2) spare rear wheels; 1 with machined rear rotor and 1 with stock rear rotor (other spare wheels in photo for an 06 or below 600rr - also for sale) - 1 new Dunlop rear tire as well

    (1) leo vince full ti factory corsa exhaust ($2600 new)

    (2) vortex gas caps

    (1) bucket of vortex front and rear sprockets

    (1) power commander and module

    (2) stock fairing stays

    (1) complete set of race bodywork, painted (not pictured)

    Numerous other odds and ends (see photos); also have spare motor parts (not a complete spare motor, though)

    The track bikes will include rear sets, clip ons, frame sliders, quick shifters/PCMs, rear sets, 520 chain/sprocket kit; slip on leo vince exhausts/a variety of other parts

    PM me with questions and offers. I will try to update with prices once I research more to find an appropriate/reasonable price on the parts!

    IMG_0009.JPG IMG_0010.JPG IMG_0011.JPG IMG_0012.JPG IMG_0013.JPG IMG_0014.JPG IMG_0015.JPG IMG_0016.JPG IMG_0017.JPG IMG_0018.JPG We are
     
  2. NickyZ

    NickyZ Well-Known Member

  3. NickyZ

    NickyZ Well-Known Member

    Also have a GPR stabilizer for sale
     
  4. Wyman

    Wyman Member

    Are the cartidges actually 20mm or are those 25mm?
     
  5. NickyZ

    NickyZ Well-Known Member

    You're right - they are 25mm kits. Sorry for the mistake and thanks for catching!
     
  6. Kennn

    Kennn Active Member

    Price for the fairings please
     
  7. 400kg

    400kg Active Member

    PM sent.
     
  8. Hurd

    Hurd Active Member

    PM sent.
     
  9. NickyZ

    NickyZ Well-Known Member

    PMs replied - I have a bunch more photos that I will try to upload
     
  10. Please message me price for shock, cartridges, rims, levers, sprockets, brake pads and model (new), and body work. I'm interested. Mike (617) 571-8923
     
  11. NickyZ

    NickyZ Well-Known Member

    Both rear shocks, one gas cap, a handful of sprockets, and one set of rotors (not listed but in the pile o' parts) gone. Shoot me an offer on any of the remaining items.
     
  12. NickyZ

    NickyZ Well-Known Member

    This stuff needs to go! PM me any offers:

    EBC race brake pads
    CRG folding levers
    Vortex Gas cap
    Dynojet stand alone quickshifter (new addition - see photo)
    Dynojet ignition module
    Ohlins 25mm front forks - can disassemble and just send the kit; or swap with a set of stock forks from your bike
    spare tank with fuel pump
    spare rear wheels; 1 with machined rear rotor and 1 with stock rear rotor
    leo vince full ti factory corsa exhaust (pending)
    2 stock fairing stays

    IMG_0456.jpg
     
  13. NickyZ

    NickyZ Well-Known Member

    Forks and quick shifter sold.
     
  14. NickyZ

    NickyZ Well-Known Member

    Updated with new parts:

    Braking "B-Wheel" front wheel with rotors - make offer
    EBC race brake pads
    CRG folding levers
    Vortex Gas cap
    Dynojet ignition module
    spare tank with fuel pump
    2 spare rear wheels; 1 with machined rear rotor and 1 with stock rear rotor
    leo vince full ti factory corsa exhaust (pending)
    2 stock fairing stays


    IMG_4134.jpg IMG_0400.jpg IMG_4134.jpg IMG_0400.jpg IMG_0397.jpg
     
  15. NickyZ

    NickyZ Well-Known Member

    All items are sold except:

    Braking "B-Wheel" front wheel with rotors
    Vortex Gas cap
    Dynojet ignition module
    spare tank with fuel pump
    2 spare rear wheels; 1 with machined rear rotor and 1 with stock rear rotor
    2 stock fairing stays
     
  16. DaddyPhatSaks

    DaddyPhatSaks Well-Known Member

    Was going to ask if you wanted to sale just the Braking rotors but I see they wont fit on standard cbr rim
     
  17. Pittenger5

    Pittenger5 Well-Known Member

    How much for the master?
     
  18. NickyZ

    NickyZ Well-Known Member

    Stock master cylinder is for a 2006.
     
  19. extremely_slow

    extremely_slow Well-Known Member

    how much for the front wheel and stock rear wheel with quick shifter?
     
  20. NickyZ

    NickyZ Well-Known Member

    One quick shifter is staying with the black bike - the other is already sold. I have one stock rear wheel and one Braking/OZ racing b-1 front wheel. If you're interested in these PM me. Otherwise everything is going with the bikes! Need to clean out the garage!
     

Share This Page