Braketech is a US company with customer service. Jeff's stuff is top notch, I'm looking forward to trying his new rotors as well.
https://kustomcockpits.com/store/ols/products/kawasaki-zx10 I know you'd like to buy used but you might give these guys a try.
Yup, M10x1.0 is the correct size.
MDM pointed out the main differences well. The FTecu uses the stock harness but there's a plug that needs repinned. There's instructions from...
This. It got old a long time ago...
I've done the following a few times so an angled hole didn't have to be drilled. I've bought flange head bolts that are predrilled for safety....
Is the vinegar supposed to be diluted? Seems like an odd choice since vinegar will make anything in the cooling system that's steel, rust.
When looking at the disc it looks more like something going on between the holes in the disc and pads. It looks like there's a reoccurring pattern...
Why? He's on a Kawasaki, not a Ducati.
It helps when the system doesn't have any fluid. The vacuum bleed device pulls the air and fluid from the reservoir through the bleeder, so no...
If you have Stahlbus fittings, do yourself a favor and get this....
These have been working out well lately. https://www.streetandcomp.com/category_s/851.htm
What bike was it?
Maybe they could knock it down to the 500-600 range if they kept it open 72 hours a day lol
Ti banjo bolts, dry. Follow the recommended torque settings. Ti rotor bolts and sprocket nuts, blue thread locker, use sparingly. Ti bolts into...
Separate names with a comma.
