Pro Bolt USA does have replacements available that can be safety wired if you prefer....
Cheap wiring harness from Ebay off same year bike... then cut/ splice/ solder connector and wiring
Way to diurese! :beer:
... a 500 twostroke!
'04-06 R1 throttle tube bolts right in.. '06-up R6 with just a little relief inside throttle housing...
I have an extra. Like new. I'll contact/ send pics by text.
There's 2 T-taps for the Bazzaz on the 600RR: one is the Switched Power in the tail section that connects to the White/ Black wire of the red...
.. scrolled back a couple pages, but guess I missed if it was posted before.. :confused:
This was sent to me by a friend... just, wow!
Those are not rebuild kits, just crash repair kits. Rebuild kits are not sold to the public.
I have 2 sets of Brembo rotors and 1 definitely has more "play" in the carrier from use compared to the other.
I guess it's possible the seals...
Also, look closely at the seal where the reservoir port is located. It can crack/ dry-rot.
Disassemble, clean, inspect and then reassemble them. They come apart like any other master cylinder. Check the bleeder screws and where they...
Hard to beat this set for the price: http://pitposse.com/noname24.html
Separate names with a comma.