Parting out everything from my 2013 RSV4 R APRC. I'm not too familiar with Aprilia prices for either OEM or aftermarket prices, so if I'm way off on something, by all means please make an offer. Prices include shipping to the continental US with the exception of the frame, subframe, tank, swing arm, engine and bodywork. For those, we'll have to figure it out on a case by case, depending on location. Everything is used so expect some typical wear and tear, but unless specified, there is no damage, and everything works as it should. If anything is not on this list let me know and I'll see if I have it. I probably missed a few bits and pieces that I didn't think are worth much. Engine (11,172 miles, no running issues or any leaks. I have video of it running just before I took everything apart. Let me know and I can link it): $2400 Frame (clean title): $900 Swing arm: $250 Subframe: $180 Forks with Ohlins cartridges (some cosmetic scuffs on the tubes which aren't visible when mounted on the bike): $900 Ohlins TTX shock: $750 Triple tree assembly: $120 Dash: $200 Wiring harness: $100 Dynojet quickshifter: $100 Gilles rear sets: $250 Woodcraft clip-ons: $80 Ohlins steering damper: $220 Wheels (including rotors and cush drive with sprocket, and also captive spacers): $650....willing to take off rotors and lower the price a bit if needed. OEM Brembo front calipers with pads (I think they're SBS dual-carbons but I'd have to check. About 50-60% life left.): $220 OEM Brembo rear caliper with bracket and pads: $80 Bodywork (not sure on the brand, haven't seen a label on the inside of the parts I checked, but they're in good condition. No cracks, no grinding marks, but the paint job sucks because previous color is bleeding through the yellow): $350 MIVV slip-on exhaust with OEM headers (some scuff marks on the exhaust from a different bracket, but no crash damage): $450 Race ECU: $280 Tank (with keyless gas cap and fuel pump. Also filled with racing foam so gas doesn't slosh around as much): $230 Motion pro throttle: $80 Pazzo levers and stock levers: $60 for both sets OEM front Brembo master cylinder with reservoir: $120 OEM rear master cylinder: $50 Brake lines/ABS module: $50 GB Racing engine covers: $120 Chain adjusters (not sure on brand, likely chinese knockoff but they work really well): $50 OEM seat: $40 Extra tall race seat (not sure on brand): $60 Radiator: $100
More pics. Still have more parts to take off and take pictures of but I ran out of time today. Watching all those MA races cut into my garage work time
I'm just going to sell that off with the tank. I don't think it's any fancy brand so it's not worth selling separately.
More pics of parts. First few going out today. Bike is almost completely disassembled (just engine, frame, swing arm left and rear headers which I'm struggling with).
Update: QS, GB racing covers, wheels, rearsets, bodywork, shock, forks, levers, radiator/oil-cooler, and rear caliper sold
Update: clip-ons, front calipers, motion pro throttle and windscreens sold At the moment the engine, wiring harness and frame are still together since I haven't had any interest in those yet. But if anyone's interested I'll make you a deal on that whole package. Or I can split it as I have it listed, no problem. Can also deliver from here to Road America in a little over a week as long as it's on my route.
Ohlins damper not for sale anymore. I'll probably be at NJMP this weekend, so if anyone needs any parts I can bring them with me, just let me know in the next couple of days.
Engine sold! Going to NJMP tomorrow, so if anyone needs any of the parts still available, let me know by noon tomorrow.
Here's what's still left. If it's not on this list, I don't have it anymore: Frame (clean title): $900 Swing arm: $250 Subframe: $180 Wiring harness: $100 MIVV slip-on exhaust with OEM headers (some scuff marks on the exhaust from a different bracket, but no crash damage): $400 Race ECU: $280 Tank (with keyless gas cap and fuel pump. Also filled with racing foam so gas doesn't slosh around as much): $230 OEM front Brembo master cylinder with reservoir: $120 Brake lines/ABS module: $50 Extra tall race seat (not sure on brand): $60 Front fairing stay: $50 Handlebar switches (left and right side): $80 Airbox: make offer Intake snorkels: make offer R&G frame sliders but without pucks (can send pics on request): $60
UPDATE: Here's what's still left. If it's not on this list, I don't have it anymore: Swing arm: $250 Subframe: $180 MIVV slip-on exhaust with OEM headers (some scuff marks on the exhaust from a different bracket, but no crash damage): $400 Tank (with keyless gas cap and fuel pump. Also filled with racing foam so gas doesn't slosh around as much): $230 OEM front Brembo master cylinder with reservoir: $120 Brake lines/ABS module: $50 Airbox: make offer Intake snorkels: make offer Bosch APRC control module: make offer R&G frame sliders but without pucks (can send pics on request): $60
Bump! I'll be at NJMP this weekend and PittRace the next weekend, if anyone wants any of the parts left I can bring them over, just let me know before.