1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

09zx6 - Rectifier placement...

Discussion in 'Tech' started by Schuber2_S, Mar 10, 2013.

  1. Schuber2_S

    Schuber2_S Well-Known Member

    My buddy is just about finished with his 09zx6 and there is some concern about the location of the rectifier as it came from factory. Where is everyone relocating? I've seen some moved up by the Ram Air...but it doesn't seem like the best location. Any help appreciated.

    Thanks.
     
  2. Richard636

    Richard636 Well-Known Member

    I can't remember exactly how I did mine on my last 09 ZX-6R but i made a bracket out of aluminum and attached somewhere near the rad cap. It was protected and had a little 'cubby' spot in the body work.

    You could also try to source a KIT mount.
     
  3. Schuber2_S

    Schuber2_S Well-Known Member

    Rectifier

    Thanks for the info...I'll look at the bike tomorrow and see if I can sort something out by the rad cap. Any other ideas appreciated.
     
  4. Greenhound386

    Greenhound386 Well-Known Member

    Self-tapping screw right beneath the ram air.
     
  5. Smalls

    Smalls 2012 Blue...

    I mounted mine on the frame just behind the neck......no way to get it damaged in a crash.......
     
  6. 2001chromo

    2001chromo Well-Known Member

    Just make sure there's some air flowing past it. I drilled a few holes under the nose of my bodywork to get a little air to flow past it by the ram air.
     
  7. metricdevilmoto

    metricdevilmoto Just forking around

    The kit location is under the battery tray.
     
  8. dubguy85

    dubguy85 Well-Known Member

    This :up:
     
  9. Schuber2_S

    Schuber2_S Well-Known Member

    Thanks all. Ram air it is.
     

Share This Page