View Full Version : 2007 sv650 racebike
Mr. Boost-Fade
05-25-2009, 07:40 PM
no expense was spared on this bike.
right now, its apart to be freshened.
it was bought from the m4 team and has a 2mm over motor as well as a ss legal motor. ill install either one you want.
penske triple
gmd did the whole chassis and forks as well.
vortex rear sets
set up with all quick change front and rear
captive spacers
bored throttle bodies
brembo m/c
there is entirely too much to list on this bike.
asking $5500
bike just finished third in moto st race at barber behind 2 duc 1000's.
finished ahead of all the other 650's in class
Was that the bike you were on in LWT practice at Barber Saturday? Man was that thing fast (not that the pilot shouldn't get the credit :D) and sounded like no other SV I've heard. That's a sharp exhaust. Beautiful bike. You shouldn't have trouble selling it. Good luck.
Mr. Boost-Fade
05-26-2009, 06:18 PM
it had the stock engine in it:D
i have a HOT ROD for it:rock:
skeesm
05-26-2009, 10:48 PM
Was that the bike you were on in LWT practice at Barber Saturday? Man was that thing fast (not that the pilot shouldn't get the credit :D) and sounded like no other SV I've heard. That's a sharp exhaust. Beautiful bike. You shouldn't have trouble selling it. Good luck.
That does it! Ahab, if this bike was ahead of you then I want it - no further convincing required. Now the question is...Mr. Boost-Fade what will it cost me to keep you on the bike so that it stays ahead of him - beating him like the red-headed stepchild that he aspires to be - it won't be there if I buy it and run against him.
But seriously, I know your reputation Mr. B-F, so I'm sure the bike is right, but tell us a bit more please. Does it have all the standard stuff like SS lines, Vortex or similar rear-sets, clip-ons, M4 exhaust of course. Title status?
skeesm
05-26-2009, 10:50 PM
Um...sorry, just spotted "Vortex rearsets."
Mr. Boost-Fade
05-26-2009, 11:45 PM
i assure you that this bike is absolutely 100% "right"
there are 2 different motor combos to choose from and it has vortex rear sets, clip ons, fairing stay,
pit bull dampener
quick shifter
igntion module
power commander
spears originally built the engine and i am now freshening it up.
when i say no expense spared, i mean NO expense spared.
bike will come painted in your choice.
i am thinking about putting 675 bodywork on it cause it just looks so dam cool!!
Chinybaby
05-27-2009, 12:01 AM
I didn't know 675 bodywork fits the SV hmmmmmmmmmmm!!
roadracer618
05-28-2009, 09:56 AM
PM sent. Thank you.
roadracer618
05-29-2009, 09:10 AM
Can you please post or send pics.
Thanks.
tdiaz_ccs_618 at yahoo
Mr. Boost-Fade
05-29-2009, 10:03 AM
lol the bike is apart. are you guy wanting pics of the chassis or what?
let me see if vicky has any from this past weekend.
Mr. Boost-Fade
05-29-2009, 10:08 AM
http://www.photoreflect.com/pr3/orderpage.aspx?pi=0HG80055080199&po=199
http://www.photoreflect.com/pr3/orderpage.aspx?pi=0HG80055080201&po=201
http://www.photoreflect.com/pr3/orderpage.aspx?pi=0HG80055080201&po=201
cb500
05-29-2009, 11:02 AM
Rob What happend to you on sunday?? at Barber
Skees, buy this bike and get yer ass back on the track!
Mr. Boost-Fade
05-29-2009, 01:38 PM
Rob What happend to you on sunday?? at Barber
CRASHED MY ROTHER BIKE IN THE RAIN:(
HURT MY WRIST. NOT SURE IF ITS BROKE OR JAMMED.
BASICALLY, I HAD JUST HAD ENOUGH:mad:
cb500
05-29-2009, 02:21 PM
Was that before or after the redflag.
the one where you jumped the motard. did not look good
good to see you get up from that.
What are you guys going to ride in motoGT?
race124
05-29-2009, 02:30 PM
Do you still have the bike. Please email me at rmurico786@msn.com
ridermonkey
06-09-2009, 04:14 PM
I am also curious about this bike, I pm'd you but if you didn't get please email:
Wildkarrad @ aol.com
Mr. Boost-Fade
06-10-2009, 12:14 AM
yes guys i still have it and am waiting on parts.
only the best will go in this bike.
spears racing internals
and i forgot that i have a new samco sport hoses silicone hose kit on it too.
there is way too much stuff to list here but be patient as i am just waiting on parts.
i finished the crank today so it will get installed in the cases soon.
vBulletin® v3.7.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.