SRX600 parts needed

[Routemeister]

I binned my SRX600 last weekend at NHIS. Here is a list of items that need to be replaced:
Front brake master cylinder
Tachometer, Tach housing (2 pieces)
right clip on.

If you have any or all, I'm ready to buy.
Thanks,
Dave Thompson
VRRA# 1389
Plate# 400

[maxslack]

I'll take a look for the tach and master cylinder. I might have a spare of each.

I'll let you know.

Don Young

[Routemeister]

No, Don, it's a second SRX6 that I own, with a stock tachometer. The one I bought from you is in the shop for transmission repair. I lost 3rd & 4th gear at a track day this spring. The undercuts were into the root of the gear teeth and one failed. The shrapnel took out more teeth. All this after going through the engine, boring it to 98mm (velocity stacks and dirty air = rapid cylinder wear) and replacing the valve stem seals with some Harley parts that crimp to the valve stem. Last summer, I was laying down some impressive smog in some corners. The bike has been repainted to match my R6. Here's a link to some photos:
http://picasaweb.google.com/david.routemeister/YamahaSRX6VintageRaceBike#