Cjanik
04-29-2009, 05:37 PM
I've never raced it in WERA before. I was going to in April at LVMS but things came up and I decided I dont want to spend this kind of money racing. Maybe later when I have a lot more income and my wife can go back to work.
I purchased it brand new in oct of 07 from lake havasu, AZ. Rode it for about 3,000 miles before I got into track days. Did about 10 track days on the bike since may of 08 and I felt ready to start racing but its stopping now.
the bike has 1 high side. the handlebar broke off and stabbed the frame so there is a little dimple on the frame by the gas tank. the insurance said its totaled because of that dimple. so its got a salvaged title now. the dimple has NO effect on the performance of the bike and the price will reflect on this fact.
2007 R6 r with 4,800 miles.
scotts/ohlins steering dampner
pazzo clutch levers
Galfer front and rear Rotors
Galfer brake pads
Galfer SS brake lines
Woodcraft left and right case covers w/ crash protection sliders
GP shift w/ woodcraft rearsets
woodcraft frame sliders
woodcraft rear spools/sliders
Power commander III tuned by Las Vegas Dyno - track only map
Akropovic full CF evo III exhaust w/ TI header.
520 Chain conversion
-1/+2 sprocket conversion
Hotbodies fairings on the bike + attack performance in a box.
Ohlins rear shock w/ TI spring, set for 170lbs but needs softer spring
Ohlins 25mm fork internals (1 trackday on rebuild)
woodcraft 50mm clip ons
traxxion tank sliders
safety wired for WERA
all in all, i've installed close to 7k in parts so thats all i'm asking for back.
Will include two brand new PR3's, a primer painted extra tank, and I have tons of stock parts i took off the bike like stock rotors, windscreen, rear pegs, stock sprockets, etc etc. (you can find a list of all the parts ill include on here, none of the parts sold if it doesnt say SOLD) (http://www.702sportbikes.com/viewtopic.php?f=10&t=22575&p=312786&hilit=rotors#p312786)
asking 7,000 OBO
bike is located in Las Vegas NV
you can email me at Cjanik84@gmail.com or PM me on here.
I'm hearing impaired so dont ask for a phone number unless you fine with texting.
hopefully you guys can see these pictures....if not i can email them if your seriously considering.
frame ding:
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.1&disp=inline&realattid=f_fu4hp90o0&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.2&disp=inline&realattid=f_fu4hqeqp1&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.4&disp=inline&realattid=f_fu4hqlxb3&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.5&disp=inline&realattid=f_fu4hqq9r4&zw
I purchased it brand new in oct of 07 from lake havasu, AZ. Rode it for about 3,000 miles before I got into track days. Did about 10 track days on the bike since may of 08 and I felt ready to start racing but its stopping now.
the bike has 1 high side. the handlebar broke off and stabbed the frame so there is a little dimple on the frame by the gas tank. the insurance said its totaled because of that dimple. so its got a salvaged title now. the dimple has NO effect on the performance of the bike and the price will reflect on this fact.
2007 R6 r with 4,800 miles.
scotts/ohlins steering dampner
pazzo clutch levers
Galfer front and rear Rotors
Galfer brake pads
Galfer SS brake lines
Woodcraft left and right case covers w/ crash protection sliders
GP shift w/ woodcraft rearsets
woodcraft frame sliders
woodcraft rear spools/sliders
Power commander III tuned by Las Vegas Dyno - track only map
Akropovic full CF evo III exhaust w/ TI header.
520 Chain conversion
-1/+2 sprocket conversion
Hotbodies fairings on the bike + attack performance in a box.
Ohlins rear shock w/ TI spring, set for 170lbs but needs softer spring
Ohlins 25mm fork internals (1 trackday on rebuild)
woodcraft 50mm clip ons
traxxion tank sliders
safety wired for WERA
all in all, i've installed close to 7k in parts so thats all i'm asking for back.
Will include two brand new PR3's, a primer painted extra tank, and I have tons of stock parts i took off the bike like stock rotors, windscreen, rear pegs, stock sprockets, etc etc. (you can find a list of all the parts ill include on here, none of the parts sold if it doesnt say SOLD) (http://www.702sportbikes.com/viewtopic.php?f=10&t=22575&p=312786&hilit=rotors#p312786)
asking 7,000 OBO
bike is located in Las Vegas NV
you can email me at Cjanik84@gmail.com or PM me on here.
I'm hearing impaired so dont ask for a phone number unless you fine with texting.
hopefully you guys can see these pictures....if not i can email them if your seriously considering.
frame ding:
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.1&disp=inline&realattid=f_fu4hp90o0&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.2&disp=inline&realattid=f_fu4hqeqp1&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.4&disp=inline&realattid=f_fu4hqlxb3&zw
http://mail.google.com/mail/?ui=2&ik=51ca939b96&view=att&th=120f39b071de5b40&attid=0.5&disp=inline&realattid=f_fu4hqq9r4&zw