FS: FZR400 w/YZF600 Engine etc.

[BMiller]

Don't miss out on this custom FZR400! The following parts are installed on this bike:
-FZR400 Frame
-'95 YZF600 Engine w/3,500 miles
-Jet Kit
-'07 ZX6R forks
-'06 636 Front Rim
-'07 ZX14R Rotors
-'07 R6 Calipers
-Goodridge Braided Lines
-Ducati Superbike Master Cylinder
-YZF600R Gas Tank
-'04 R6 Swingarm and Rim and Shock
-R6 Sealed Battery(brand new)
-Brand New Vance & Hines SS2R Headers and Midpipe, used chopped SS2R can
-Woodcraft CFM Rear Sets
-Woodcraft CFM Clipons
-520 Conversion 15 Tooth Vortex Front and 50 Tooth Supersprox Rear Sprocket (all brand new)
-K&N Drop-in Air Filter
-Keyless Gas Cap
-Limited Edition Vance & Hines NRC Stator Cover (mint)
-Brand New NRC Starter/Peanut Cover
-YZF600 Fairings (need some prep and paint) and Headlight w/Ducati Superbike Taillight
-YZF600 Gauge Cluster (speedo doesn't work since the fork swap, but the tach works for track use)

Clean and clear TN title in hand. This is a RARE opportunity to find an FZR400 this highly modified. Well over $5,000 has been dumped into this bike. My loss is your gain. $3,500 (423)765-6586

Gauges and can not mounted in pics, but included.
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316625.jpg
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316623.jpg
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316620.jpg
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316629.jpg
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316634.jpg
http://pic20.picturetrail.com/VOL99/1957287/9302955/362316636.jpg

[jim137]

Any interest in trade toward very trick, titled, street legal supermotard? I have only put about 500 miles on it since building it.

[BMiller]

Sorry, need the cash right now.......although that is tempting:up:

[jim137]

I am interested...let me see what I can come up with.

It looks like there is a lot of rear ride height/swingarm angle...is there ride height adjustment?

Thanks, Jim

[willi777]

What a work of art! early YZF tank, body + R6 swinger... that bike is like a siren luring me to seek a loan for $3500... was there a lot of machining to get the R6 swingarm on there? I know it's 9 3/4" wide...

[BMiller]

I am interested...let me see what I can come up with.

It looks like there is a lot of rear ride height/swingarm angle...is there ride height adjustment?

Thanks, Jim

Jim,

I have a 1.5" lowering link that should be installed in the next day or so, but as far as ride height there are a few options out back, one would be relocating the shock mount the to top bar of the subframe and the other would be to get an aftermarket shock such as an Ohlins and use the adjustment on that. I'm hoping that link solves the rearend's "fightered" look:D

-Billy

[BMiller]

What a work of art! early YZF tank, body + R6 swinger... that bike is like a siren luring me to seek a loan for $3500... was there a lot of machining to get the R6 swingarm on there? I know it's 9 3/4" wide...

Thanks for the compliments! The inside of the frame was machined down and then I had bushings pressed into the swingarm pivot sleeve so I could use the stock FZR pivot bolt, the swingarm was not modified, here are pics of that:
http://pic20.picturetrail.com/VOL99/1957287/21330993/359519294.jpg
http://pic20.picturetrail.com/VOL99/1957287/21330993/359519297.jpg
http://pic20.picturetrail.com/VOL99/1957287/21330993/359519307.jpg

[hrc_nick_11]

Holy Neat franken bike batman! How did you get the sprockets to line up with out offsetting the rear wheel? I like the way the tank looks on that frame very R7 looking.

[omnivore]

Awesome!
Wish this had been for sale before I got my last bike.
The R6 swingarm looks longer than the 400 arm...what's the current wheelbase?

[BMiller]

I'll have to measure it, but it's less then an FZR600 stock.:up: