PDA

View Full Version : 2006 CBR1000RR Track/Race


bdubb
03-31-2009, 02:04 PM
Year
2006

Make
Honda

Model
CBR1000RR

Mileage
6,455

Asking Price
$9,000 Neg. (NO TRADES or PAYMENTS)

Contact Info
wolvertonbrad@hotmail.com

This has been an outstanding bike for me with aprox. 5,000 easy street miles on it and the rest track time.

I will field interested buyers and realistic offers only.

The bike was purchased new from Honda of Houston in April of 2007 and rode on the street until the Spring of 2008. Since then it has been to approx. 12 trackdays, and removed from street duty. The bike can be put back to street trim, but this sale does not include street plastic or lights.

Title is in good standing, however, still in the hands of the bank. Should you decide to purchase the bike a condition will be added to the Bill of Sale concerning the hand over of the title to the Buyer.

http://i54.photobucket.com/albums/g95/bwolv/Bike/th_P1310799.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/P1310799.jpg)
http://i54.photobucket.com/albums/g95/bwolv/Bike/th_P1310798.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/P1310798.jpg)
http://i54.photobucket.com/albums/g95/bwolv/Bike/th_0301trakday003.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/0301trakday003.jpg)
http://i54.photobucket.com/albums/g95/bwolv/Bike/th_0301trakday004.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/0301trakday004.jpg)
http://i54.photobucket.com/albums/g95/bwolv/Bike/th_0301trakday005.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/0301trakday005.jpg)
http://i54.photobucket.com/albums/g95/bwolv/Bike/th_0301trakday006.jpg (http://i54.photobucket.com/albums/g95/bwolv/Bike/0301trakday006.jpg)


Current mods:
- Stock aluminum wheels (Marchesini wheels, as pictured, are not included)
- BT-003 Tires (Soft Front/Medium Rear)
- Racetech fork internals (Set for 210# rider)
- Ohlins TTX shock (Set for 210# rider)
- Vortex clip-ons (+spares)
- Sharkskinz bodywork
- Sato Rearsets Type 2 (+spares)
- Gilles shift shaft brace
- A-tech air intake
- BMC street filters
- Akrapovic full-race s/s exhaust w/carbon hex can
- Dynojet Power Commander w/ custom map (Waylon @ NW Honda)
- Dynojet Ignition Module
- Dynojet Quickshifter (w/ rod “A”)
- -1/+2 sprockets (Afam/Driven)
- RK Gold 520 chain
- Speedo-healer
- HRC 1/6th turn throttle
- PAIR block-off plates
- Motivation “cut” frame sliders
- Shogun swing arm sliders/spools (+spares)
- Motul Brake Fluid
- Motul 300V Synthetic Oil
- Steel Braided Front brake lines
- GPRv4 Steering Damper
- Woodcraft Case Cover
- STM Slipper Clutch
- STM 32mm Slave Cylinder
- Sharkskinz Race Tail w/ Foam Pad Seat
- EBC Extreme Pro Front Brake Pads

In addition to the above, all spares and remaining OEM parts I have for the bike will go to the Buyer.

The bike is currently located in the Houston, TX area.


Thank you
:beer:

bdubb
04-01-2009, 11:36 AM
Bump

Looking at over $7k in aftermarkets parts in addition to the bike itself. Means you could be getting all of that on an unmolested bike for $2k to $3k. Hard to beat in my opinion!

rdidi
04-03-2009, 07:47 PM
Lmk if you are willing to part with speedo.

Rdidi4532@aol.com

bdubb
06-23-2009, 07:01 PM
Bump $8,200


Includes front and rear Pitbull stands

rpmcycle
06-29-2009, 10:25 PM
i am interested in marchesini wheels.let me know if they are for sale.
rpm_cycle@yahoo.com